We are experiencing some delays due to Covid-19 regulations. We thank you for your patience and will assist you as promptly as possible.

We are experiencing some delays due to Covid-19 regulations. We thank you for your patience and will assist you as promptly as possible.

Search
Menu Close

HOBO TidbiT v2 UTBI-001 - Water Temperature USB Data Logger

Manufacturer:
The tiny TidbiT v2 has 12-bit resolution and a precision sensor for ±0.2 °C accuracy over a wide temperature range. The rugged TidbiT is waterproof to 300m
Part Number: UTBI-001
Back to Previous Page
$282.00 ex GST
i h

Overview

Only 3x4 cm, this tiny data logger measures temperatures over a wide temperature range. The TidbiT v2 provides 12-bit resolution and has ±0.2 °C accuracy.
It is designed for outdoor and underwater environments and is waterproof to 300 m (1000 ft).
An optical USB interface allows users to offload data in seconds.

Please note, a solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).

Highlighted Features

  • Onset's smallest temperature data logger
  • Waterproof to 300 meters (1,000 feet)
  • Data readout in less than 30 seconds via fast Optic USB interface

In what environment does this data logger operate?

This data logger operates in outdoor and underwater environments.

What measurements does this data logger support?

The UTBI-001 data logger supports the following measurements: Temperature and Water Temp

Note: The below diagram is a representation of items required for the system and does not represent items received in the kit. Loggers purchased are loggers alone, base stations and shuttles purchased seperatly. 

IMPORTANT: An optic base station (BASE-U-4) or Waterproof Shuttle (U-DTW-1) + HOBOware software is required to operate this logger.


HOBOware Software is now available as a FREE Download. HOBOware-Pro advanced software is available to purchase.


Temperature Sensor
Operation range:* 
-20° to 70°C (-4° to 158°F) in air;
maximum sustained temperature of 30°C (86°F) in water*

Accuracy: 0.2°C over 0° to 50°C (0.36°F over 32° to 122°F)

Resolution: 0.02°C at 25°C (0.04°F at 77°F)

Response time: 5 minutes in water; 12 minutes in air moving 2 m/sec; 20 minutes in air moving 1 m/sec (typical to 90%)

Stability (drift): 0.1°C (0.18°F) per year

Logger
Real-time clock: ± 1 minute per month 0° to 50°C (32° to 122°F)

Battery: 3 Volt lithium, non-replaceable

Battery life (typical use): 5 years with 1 minute or greater logging interval

Memory (non-volatile): 64K bytes memory (approx. 42,000 12-bit temperature measurements)

Weight: 19.6 g (0.69 oz)

Dimensions: 3.0 × 4.1 × 1.7 cm (1.2 × 1.6 × 0.68 in.); mounting bail 4.6 mm (3/16 in.) diameter hole

Wetted materials: Epoxy case

Waterproof: To 305 m (1000 ft.)

Logging interval: Fixed-rate or multiple logging intervals, with up to 8 user-defined logging intervals and durations; logging intervals from 1 second to 18 hours. Refer to HOBOware software manual.

Launch modes: Immediate start, delayed start

Offload modes: Offload while logging; stop and offload

Battery indication: Battery level can be viewed in status screen and optionally logged in datafile. Low battery indication in datafile.

NIST certificate: Available for additional charge

The CE Marking identifies this product as complying with the relevant directives in the European Union (EU).


* To guarantee accuracy, the TidbiT v2 Temp must not be used in condensing environments and water temperatures higher than 30C (86F) for more than eight cumulative weeks over the life of the logger. Frequent or prolonged exposure will lead to measurement drift and eventual failure.

HOBO Temperature Data Logger UTBI TidBit

Learn the features of this small temperature logger, including epoxy covering, waterproof depth, degree Celsius temperature accuracy, and memory statistics. Battery details, optical communications for underwater offloading, and HOBOware Pro software compatibility are also covered.

Onset HOBO Water Temperature Data Logger Range

HOBOware Software

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.


HOBOware Standard features

  • Simple menus for fast, easy logger setup and readout
  • Point & click for fast setup and readout
  • Scaling to real-world engineering units
  • Presentation-quality graphs
  • Easy export of data files to text or Excel format

FREE DOWNLOAD


Learn more about HOBOware and HOBOware-Pro Features >>


IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)


Overview

Only 3x4 cm, this tiny data logger measures temperatures over a wide temperature range. The TidbiT v2 provides 12-bit resolution and has ±0.2 °C accuracy.
It is designed for outdoor and underwater environments and is waterproof to 300 m (1000 ft).
An optical USB interface allows users to offload data in seconds.

Please note, a solar radiation shield is required to obtain accurate air temperature measurements in sunlight (RS1 Solar Radiation Shield, assembly required; M-RSA pre-assembled Solar Radiation Shield).

Highlighted Features

  • Onset's smallest temperature data logger
  • Waterproof to 300 meters (1,000 feet)
  • Data readout in less than 30 seconds via fast Optic USB interface

In what environment does this data logger operate?

This data logger operates in outdoor and underwater environments.

What measurements does this data logger support?

The UTBI-001 data logger supports the following measurements: Temperature and Water Temp

Note: The below diagram is a representation of items required for the system and does not represent items received in the kit. Loggers purchased are loggers alone, base stations and shuttles purchased seperatly. 

IMPORTANT: An optic base station (BASE-U-4) or Waterproof Shuttle (U-DTW-1) + HOBOware software is required to operate this logger.


HOBOware Software is now available as a FREE Download. HOBOware-Pro advanced software is available to purchase.


Customers who bought this item also bought

TidbiT Boot Black - BOOT-TIDBIT-BK for tidbit

The optional TidbiT thermoplastic elastomer boot provides cushioning for use in harsh conditions — offered in black to minimize underwater visibility. Five boots included.
$48.00 (ex gst)

HOBO Optic USB Base Station

The new Universal Optic USB Base Station and a series of couplers are used to offload data from any HOBO® data logger with an Optic USB interface. The Optic USB Base Station connects to your computer via USB, while connecting to the logger via an appropriate coupler.
$265.00 (ex gst)

HOBO® Waterproof Shuttle - U-DTW-1

The HOBO Waterproof Shuttle provides convenient readout and relaunching of underwater and outdoor HOBO loggers with an Optic USB interface, and is waterproof to 20m. The HOBO Waterproof Shuttle can also be used as a base station.
$530.00 (ex gst)