Designed for use anywhere that gases are employed in both industrial and commercial applications. OneTemp distribute gas detection technologies from some of the world leaders and have systems available for Flammable, Toxic, Refrigerant and other gases. Many of our sensors are Australian made.
The GDA 4350 Carbon Dioxide Gas Sensor can detect CO₂ at very low levels, and will allow you to monitor indoor air quality with ease.
Onset’s HOBO MX1102 CO2 logger makes it more convenient than ever to measure and record CO2 in buildings and other non-condensing environments. Download to your phone or PC.
This sensor monitors Carbon Dioxide (CO2) gas; if levels exceed preset limits, designated personnel are alerted via text, email, or call
Measure the amount of CO gas in the surrounding air and receive real time alerts if levels have been exceeded
Measure the levels of toxic H2S gas in the environment and get alerts when thresholds are breached
This sensor installs quickly, allowing propane providers to remotely monitor tank levels.
The VCP Carbon Monoxide (CO) Detectors with a measuring range up to 300ppm are suitable for CO measurement in parking garages, tunnels, engine repair shops, loading bays, engine test benches, shelters, go-kart race courses etc.
The Duct air quality transmitters QDT 24 series for the measurement of VOC's (Volatile Organic Compounds)
The room air quality transmitters QRT 24 series for the measurement of VOC's (Volatile Organic Compounds)
The GDA 2728 E-Sense Oxygen (O2) Electrochemical Gas detector is a Loop powered 4/20mA output device with a range of gas sensor has a range of 0-25% vol Oxygen.
The GDA 2726 E-Sense Ammonia (NH₃) Electrochemical Gas Detector sensor is a Loop Powered 4/20mA output device available in 0-150ppm, 0-300ppm and 0-1000ppm detecting ranges.
The GDA 2725 E-Sense Carbon Monoxide (CO) Electrochemical Gas Detector is a Loop Powered 4/20mA output device available in 0-100ppm and 0-200pmm detecting ranges
The GDA 2729 E-sense Hydrogen Sulphide (H2S) Electrochemical Gas Detector is a loop Powered 4/20mA output device with a range of 0-100 ppm Hydrogen Sulphide.
The GDA 2527 E-Sense Nitrogen Dioxide (NO2) Electrochemical Gas Detector is a Loop powered 4/20mA output device with a range of 0-10 ppm Nitrogen Dioxide.
The GDA 2730 E-Sense Sulphur Dioxide (SO2) Electrochemical Gas Detector Loop Powered 4/20mA output device with a range of 0-10 ppm Sulphur Dioxide
The GDA 3100 Refrigerant Gas Detector uses the latest in NDIR techniques for detecting a wide range of refrigerant gases and is immune from cross sensitivity to other gases
The GDA 2000Ex Explosion Proof (IEC Ex) Flammable Gas Detector is certified for use in Zone 1 Hazardous areas within Australia.
THE GDA 3000 is an Explosion Proof (IEC Ex) Flammable Carbon Dioxide Gas Detector. This Infra red sensor is certified for use in Zone 1 Hazardous areas within Australia.
GDA 2000Tx Explosion Proof (IEC Ex) Toxic and Oxygen Gas Detector is certified for use in Zone 1 Hazardous areas within Australia.
The Kimo AQ 110 measures the level of carbon dioxide (CO2) present in ambient air.
The Carbon Dioxide (CO2) + Temperature transmitter CDR 010T is a self-calibrating microprocessor-controlled unit with 2 x 0-10VDC Outputs.
The CO2R-series can measure Carbon Dioxide (Co2) ranges of 400-2.000 ppm, 0-2.000 ppm, 0-5.000 ppm, 0-10.000 ppm
RCD 010 THD is a wall mounted transmitter which combines Carbon Dioxide (CO2) + Humidity (rH) + Temperature (T) with a display
CO2 concentration provides insight into facility ventilation quality and HVAC calibration. Greenhouses and modern grow spaces also rely on CO2 sensor data to optimize crop growth.
Maintain wellness and productivity with the Monnit Wireless CO2 Sensor below.
An advanced carbon monoxide detector designed to provide early warning of spontaneous combustion in pulverisers for coal and biomas
An advanced carbon monoxide detector is designed to provide early warning of spontaneous combustion in coal and biomass storage silos.
The CO2D-series Duct Carbon Dioxide Transmitter is a durable, efficient device offering flexible measuring ranges and versatile output capabilities. With a 15-year lifespan, enhanced accuracy, and adaptable for various environments, it's a prime choice for industrial CO2 monitoring applications.