Search
Menu Close

Water Monitoring Instruments for Industry

With transmitters and controllers by JUMO, pHionics, Intech and other suppliers, you can measure and control the most varied of electrochemical measurements in liquids. Reliably control conductivity, redox potential, and pH value, as well as the concentration of ammonia, bromine, chlorine, chlorine dioxide, dissolved oxygen, caustic soda, hydrogen peroxide, ozone, peracetic acid and nitric acid.

Download the latest Jumo Liquid Analysis Catalogue HERE

Display per page

pHionics D-pHi - Differential ORP Sensors with 4-20 mA

The pHionics D-pHi series provides accurate OPR measurements from -1000 to +1000 mV to a receiver for continuous monitoring.
from $1,711.00 (ex gst)

pHionics D-pHi - Differential pH Sensors with 4-20 mA

The pHionics D-pHi series provides accurate pH measurements from 0-14pH to a receiver for continuous monitoring.
from $1,493.00 (ex gst)

pHionics D-pHi Series Refill Kit

Refill the D-phi reference solution to prevent sensor drift and reduce frequency of calibration checks and recalibrations.
$196.00 (ex gst)

pHionics STs - Conductivity Sensor with 4-20mA output

The pHionics STs Seriesâ„¢ Conductivity is a water quality sensor designed to pair with a datalogger or RTU for real-time data capture.
$2,760.00 (ex gst)

pHionics STs - DO (Dissolved Oxygen) Sensor with 4-20mA

The pHionics STs Series™ Dissolved Oxygen sensor accurately measures dissolved oxygen (0-20 mg/L or percent saturation) and temperature (0-50°C) over long periods of time with little maintenance required.
$3,072.00 (ex gst)

pHionics STs - ORP (Redox) Sensor with 4-20mA output

The pHionics STs Seriesâ„¢ ORP sensor provides reliable ORP (redox) and temperature measurements to a datalogger, RTU, PLC, or SCADA system for continuous water quality monitoring.
$2,352.00 (ex gst)

pHionics STs - pH Sensor with 4-20mA output

The pHionics STs Seriesâ„¢ pH sensor provides accurate pH and temperature measurements from 0-14pH to a datalogger or RTU for continuous water quality monitoring.
$2,232.00 (ex gst)

Intech LPI-pH - Isolating pH Voltage Input to 4~20mA Output Loop Powered Transmitter

The LPI-pH is a loop powered, isolated, pH Cell input, to 4~20mA output transmitter, with integral Pt100 RTD temperature compensation, and LCD display of 0~14.00pH.
$1,037.00 (ex gst)

Intech pH Probes

A selection of general purpose pH probes.
call for pricing

Jumo Ammonia Sensitive Sensor

The product measures ammonia (NH3) in aqueous solutions. It is mainly used in refrigeration plants to reliably detect possible leaks.
call for pricing

Jumo AQUIS 500 Ci - Transmitter / Controller

Transmitter/Controller for Inductive Conductivity, Concentration, and Temperature (202565)
call for pricing

Jumo AQUIS 500 pH - Transmitter / Controller

transmitter / controller for pH, ORP, NH3 (ammonia) concentration and temperature (202560)
call for pricing

Jumo AQUIS touch P - Liquid Analysis Multichannel Instrument

The JUMO AQUIS touch P provides a central platform for Measurement, Control and Recording from the range of Jumo Liquid Analysis Sensors.
call for pricing

Jumo AQUIS touch S - Liquid Analysis Measuring Device

Modular Multichannel Measuring Device for Liquid Analysis with Integrated Controller and Paperless Recorder (202581)
call for pricing

Jumo CTI-500 - Inductive conductivity transmitter 202755

The device is used for measurement / control of the conductivity / concentration of fluid medium.
call for pricing

Jumo CTI-750 - Inductive conductivity transmitter 202756

The device is used for measurement / control of the conductivity / concentration of fluid medium.
call for pricing

Jumo ecoLine & BlackLine pH single-rod electrodes

JUMO ecoLine / JUMO BlackLine pH general purpose single-rod electrodes (201005)
call for pricing

JUMO ecoLine Ci - Inductive conductivity and temperature sensor for general water 202943

The sensor detects the electrolytic conductivity of a process liquid.
call for pricing

Jumo ecoLine NTU - Optical Sensor for Turbidity Measurements (202670)

The JUMO ecoLine NTU is an optical sensor designed to measure turbidity in aqueous solutions. The wide measuring range of the sensor enables its deployment in many applications. The turbidity measured value is display on the JUMO AQUIS 500 RS with integrated controller.
call for pricing

Jumo tecLine Ci - Hygienic inductive conductivity and temperature sensor 202941

The sensor detects the electrolytic conductivity of a process liquid
call for pricing

Jumo tecLine Ci-S - Inductive conductivity and temperature sensor for general process 202942

The sensor detects the electrolytic conductivity of a process liquid
call for pricing

Jumo tecLine pH single-rod electrodes (201020)

JUMO tecLine pH electrodes are high-quality sensors for professional applications where Accuracy and durability is important.
call for pricing

Jumo digiLine CR ST10 - Transmitter

Transmitter for separate conductive conductivity sensor
call for pricing

Jumo digiLine CR HT10 - Head Transmitter

Head transmitter with conductive two-electrode conductivity sensor type EC
call for pricing

Jumo digiLine CR HT20 - Head Transmitter

Head transmitter with conductive two-electrode conductivity sensor type PVC
call for pricing

Jumo digiLine CR HT70 - Head Transmitter

Head transmitter with conductive four-electrode conductivity sensor type 4P
call for pricing

Jumo digiLine CR HT30

Head transmitter with conductive two-electrode conductivity sensor type VA
call for pricing

Jumo digiLine CR HT40 - Head Transmitter

Head transmitter with conductive two-electrode conductivity sensor type SL
call for pricing

Jumo digiLine CR HT50 - Head Transmitter

Head transmitter with conductive two-electrode conductivity sensor type PK
call for pricing

Jumo digiLine CR HT60 - Head Transmitter

Head transmitter with conductive two-electrode conductivity sensor type GT
call for pricing

Jumo digiLine Ci ST10 - Head Transmitter

Intelligent electronic components for inductive conductivity sensors for automation systems with JUMO digiLine, IO-Link, analog or binary signals. Transmitter for separate inductive conductivity sensor
call for pricing

Jumo digiLine Ci HT10 - Head Transmitter

Head transmitter with inductive conductivity sensor
call for pricing

Jumo digiLine Sensor Interface

Digital or analog interface compatible with pH/ORP/Temp sensors
call for pricing

Jumo digiLine O-DO S10 - Digital DO Sensor

The JUMO digiLine O-DO S10 is an intelligent sensor for measuring dissolved oxygen in various applications. With its latest optical technology, precise long-term stability is achieved. It features convenient interfaces, including analog and digital, for easy connection to field devices and process control systems.
call for pricing

Jumo AQUIS 500 RS - Display / Controller

The device is a display unit/controller for digital sensors with Modbus protocol. It features multiple interfaces, including 1 digital interface and 1 analogue temperature input. The LCD graphic display allows easy visualisation of input signals. It also offers relay contacts and optional analogue outputs for versatile control tasks.
call for pricing

Jumo tecLine Br - Bromine Sensor

The membrane-covered, amperometric sensor works on the three-electrode principle; it is used for the online measurement of hypobromous acid (HOBr). The electronic components integrated in the sensors provide a temperature-compensated current signal (4 to 20 mA) or a Modbus RTU output signal.
call for pricing

JUMO tecLine Cl2 - Free Chlorine Sensor

These membrane-covered amperometric sensors are used to measure the concentration of free chlorine (e.g. in drinking water, swimming pool water, industrial water, process water, and cooling water). The sensors can be connected directly to a suitable indicating and control device
call for pricing

Jumo tecLine H2O2 and PAA hydrogen peroxide and peracetic acid sensor

The membrane-covered, amperometric sensors measure the concentration of hydrogen peroxide or peracetic acid in aqueous solutions. Typical application areas include electroplating plants, dairies, swimming pools, and the chemicals industry.
call for pricing

JUMO tecLine HD Redox Electrode

The electrode acquires the redox potential of water and aqueous-based media. A robust industrial electrode for the most demanding applications with increased dirt and poison load as well as oil-containing media.
call for pricing

JUMO tecLine ClO2 and O3 - Chlorine Dioxide and Ozone Sensor

These membrane-covered amperometric sensors measure the concentration of chlorine dioxide or ozone in aqueous solutions (e.g. drinking water, swimming pool water, service water, process water, and cooling water). The sensors can be connected directly to a suitable indicating or control device.
call for pricing

Jumo tecLine TC - Total Chlorine Sensor

This membrane-covered, amperometric sensor measures the total chlorine concentration in water and acquires "free chlorine" from inorganic chlorination products (chlorine gas, hypochlorite, etc.) and "combined chlorine" (e.g. chloramine). It can only be used in water of drinking or swimming pool water quality.
call for pricing
Filters Close