Calex Infrared

Featured products

Calex ExTemp intrinsically safe infrared temperature sensor, ATEX and IECEx certified

Calex ExTemp intrinsically safe infrared Thermometer with ATEX and IECEx rating makes it suitable for many applications in hazardous areas.

Call for pricing

PyroMini Infrared Thermometer and Touch Screen

The Calex PyroMini is a Miniature Infrared Temperature Sensor with Touch Screen Interface, 4 to 20 mA or RS485 output and alarm relay outputs.

Call for pricing

Calex PyroCouple Series Infrared Thermometer

Temperature range: -20°C to 500°C, General Purpose low cost thermometer.

$313.00 ex GST

Display per page

Air Purge Collar for ExTemp - APM

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

$120.00 ex GST

Calex Dual Laser Sighting Bracket

The Dual Laser Sighting Bracket is a sturdy mount for the sensor and provides continuous target sighting while measurements are being taken.

Call for pricing

Calex ExTemp Loop Configuration Tool (USB Adapter)

All ExTemp models are fully configurable via the optional USB adapter. The included Windows-compatible configuration software allows the user to fully setup the ExTemp Thermometers.

$405.00 ex GST

Calex Protective Plastic Window - PWL - Large

When fitted over the lens of the sensor, the protective plastic window in stainless steel holder provides mechanical protection

$120.00 ex GST

Calex Protective Plastic Window - PWS - Small

When fitted over the lens of the sensor, the protective plastic window in stainless steel holder provides mechanical protection

$106.00 ex GST

Calex PyroCube G For measuring glass surface temperature

The PyroCube G measures glass surface temperatures from 50°C to 2400°C.

Call for pricing

Calex PyroCube M - For low-temperature metals

PyroCube M - Pyrometer with fast response and small measurement spot, for low-temperature metals

Call for pricing

Calex PyroCube P Thin film plastic temperature measurement

The PyroCube is an infrared pyrometer with an extremely fast response time and a very small measurement area size suitable for Thin Film Plastic Temperature Measurement.

Call for pricing

Calex PyroCube S and F For small targets and fast measurements

Calex PyroCube infrared temperature sensor with fast response, small measured spot and LED sighting

Call for pricing

Calex PyroMiniBus Multi-Channel Infrared Temperature Monitoring System

Calex PyroMiniBus Multi-Channel Infrared Temperature Monitoring System with miniature sensing heads and display modules.

Call for pricing

Calex PyroNFC - Smartphone Configurable Infrared Temperature Sensor

The PyroNFC Smartphone Configurable Infrared Temperature Sensor for -20-1000 Deg C

$313.00 ex GST

PyroCube XS For extremely small targets

The PyroCube XS is a range of infrared temperature sensors with tightly focused optics that can measure very small areas.

Call for pricing

PyroMini 2.2 Two-part Pyrometer for High Temperature Targets and Metals

Miniature Infrared Temperature Sensor for Demanding Applications with Optional Touch Screen. 100 to 2000Deg C

Call for pricing

PyroMiniUSB Infrared Temperature Sensor for Benchtop, Laboratory and Education

Miniature non-contact temperature sensor with USB communications for temperatures from -20°C to 1000°C

From $25.00 ex GST

PyroUSB

PC Configurable Infrared Temperature Sensors with 4-20 mA Output

Call for pricing

Calex Air - Water Cooling Jacket

The air/water cooled housing allows the sensor to withstand ambient temperatures which exceed the normal 70°C limit.

Call for pricing

Calex Air purge collar - Large

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

$134.00 ex GST

Calex Air purge collar - Small for 15:1 & 30:1 Sensors

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

$106.00 ex GST

Calex Air purge collar - Small for 2:1 Sensors

The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.

$93.00 ex GST

Calex Large Adjustable Mounting Bracket - ABL

The adjustable mounting bracket consists of a fixed mounting bracket plus another L-shaped bracket. When assembled as shown the adjustable mounting bracket offers a rigid support for the sensor and allows fine adjustment in two planes.

$58.00 ex GST