Shimaden Lite Software is a simple user interface for operator type changes to a controller and is “FREE” with Shimaden controllers. With the wizard set-up feature the program automatically locates the controllers and configures the software ready for use, no programming is required. All you need is any Shimaden controller with the communications option fitted. It’s the best and cheapest way to get your process on line as a convenient mini SCADA system.

Features

• Auto seek: Find controllers automatically.
• Auto configuration: Shimaden Lite automatically adopts controller configuration.
• User friendly controller configuration from computer.
• Password protection.
• Trend graph of PV & SV.
• Trend graph has most recent records Scan settings 1 sec, 15 sec, 1 min.
• Controller identification label.
• CSV Report generation for viewing data in Excel.
• Alert window for showing status of controller events.

 

Download Shimaden Lite (External Site)

Please Note: Shimaden Lite should only be used on Windows 10, 8.1/8 or 7 and is not a replacement for a full SCADA system. For information on Intech Instruments’ full SCADA system please view MicroScan SCADA.

Shimaden Lite supports the following:

Basic controller operation, COM mode, set value changes, Event settings, pattern editing, start and stop etc, but NOT in depth controller settings such as analogue out modes etc. Also, note that the software does not allow controller settings to be downloaded to a file and sent to another controller.

 

Controllers / Indicators Supported (Shimaden Lite 1.4.1):
RS485 or RS232*:	RS422 or RS232*:
SR90 Series	SR253
SD16A / SD16	SR25
SD24	SD20
SR80 Series	SR73A
FP93	FP21°
SR23
FP23
SRS10A Series
MR13^

Notes:

* RS232 will connect to one controller only.
* 2400-IS not required when using RS232.
^ The MR13 has not set value (SV) facility from the computer.
° Important: When an FP21 is present all devices in the Data Highway must use 4800 baud rate