-
OVERVIEW
Thermal Imaging for Continuous Process Monitoring and Quality Control
When thermal imaging inside refractory lined furnaces or boilers is required the plant operator is required to cut large openings in the refractory to enable viewing of the critical area. This can cause significant wasted energy from heat loss through the opening and can be difficult to keep the opening free from debris.
With the introduction of the FTI-Eb BoreScope it is possible to use the proven technology of the LAND FTI-E 391 thermal imager to accurately profile the temperature of the entire furnace with only a small opening in the wall.
Key Benefits
- Wide angle imaging inside the vessel to maximise coverage of the products
- High performance water cooling system with low water flow requirements even in the highest temperature furnaces
- Integrated air purge to keep the optical system clear of debris, while consuming minimal instrument air
- Optional Auto-retraction mechanism to protect the imager should the water cooling or air purge supply fail
The FTI-E Thermal Imaging camera is an integral part of the LAND intelligent imaging solution, and is complemented by an extensive range of dedicated system peripherals.
LAND Image Processing Software
- On-line system providing flexible, application specific thermal analysis
- FTI-E Control Processors
- Optional industrial processor providing local process control, configuration and process visualisation
- Industrial Housing
- Designed to protect the imager in even the harshest of operating environments and ensures reliable continuous operation
-
SPECIFICATIONS
Temperature
Low Temperature (C): 600 High Temperature (C): 1600 Low Temperature (F): 1112 High Temperature (F): 2912 FTI-E Thermal Imager
Measurement range 600 to 1600 °C / 1112 to 2912 °FSpectral response nominal 3.9 µmFrame rate 30 frames per secondImage pixels 384 x 288Detector type Uncooled microbolometerSystem measurement accuracy ±1%System temperature measurement drift with ambient temperature 0.2 ° indicated / 1 ° ambient (°C or °F)(Imager & Control Processor or PC, ° indicated / ° ambient)System thermal resolution (rms value) < 0.3 °C / < 0.54 °FAmbient temperature range 5 to 50 °C / 40 to 120 °FSealing IP 65 / NEMA 4Vibration 0.5mm, 10 to 60 Hz; 3g, 60 to 300 HzCE Certification EN 61326: 1999 BBorescope
Field of View 30° or 60°Probe Length 588.5 mm / 23”Probe Diameter 88.9 mm / 3.5”Flange DN 100 PN 16Other flange options available on requestDimensions (overall) h x w x l 258 x 269 x 905 mm / 10” x 11” x 36”Weight 32.5 kg / 72 lbSealing IP 67 / NEMA 4Borescope 300.5 m / 19” min. focusField of View 30° x 22.5°Borescope 600.5 m / 19” min. focusField of View 60° x 45°Distance fromobject (m / ft)Target Area(m / ft)Pixel Area(mm / in)Target Area(m / ft)Pixel Area(mm / in)1 m / 3 ft0.54 x 0.40 m /1.61 x 1.19 ft1.4 mm / 0.050”1.15 x 0.83 m /3.46 x 2.49 ft3.6 mm / 0.130”5 m / 15 ft2.68 x 1.99 m /8.04 x 5.97 ft6.9 mm / 0.249”5.77 x 4.14 m /17.32 x 12.43 ft18.0 mm / 0.650”10 m / 30 ft5.36 x 3.98 m /16.08 x 11.93 ft13.8 mm / 0.497”11.55 x 8.28 m /34.65 x 24.85 ft36.1 mm / 1.299”15 m / 40 ft8.04 x 5.97 m /21.44 x 15.94 ft20.7 mm / 0.663”17.32 x 12.43 m / 46.19 x 33.14 ft54.1 mm / 1.732”20 m / 60 ft10.72 x 7.96 m /32.15 x 23.87 ft27.6 mm / 0.997”23.09 x 16.57 m / 69.28 x 49.71 ft72.2 mm / 2.598”
Land FTI-Eb – Furnace Monitoring
$0.00 ex GST
The FTI-Eb BoreScope Thermal Imager accurately profiles the temperature of the insides of an entire furnace with only a small opening in the wall.
