• Field Programmable Input and Output Ranges.
• Bi-Polar Output Ranges.
• Fast Response Time, Allowing Accurate Control.
• Impedance Matching on Input.
• Contact Closure Selection.
• Crystal Locked Period Measurement.
• Input to Output Isolation 1.0kV.
• High Accuracy 0.1%.
• Universal AC/DC Power Supply.
• Compact DIN Rail Mount Enclosure.
• Available Standard or Special Calibration.

 

Frequency Input	2 Wire Sine / Square / Pulse, Uni-polar / Bi-polar. (Signals < 2Vpp Bipolar Only.)
	Minimum Input Signal = 15mVpp
	Minimum Input Signal = 15mVpp
	Field Programmable Span From 0.4Hz to 40kHz. (60Hz Max. for Contact Input.)
	Adjustable Input Impedance From 1200Ω to 100kΩ.
	Open Collector Output, Limited to 12Vdc @ 10mA
	Time-out to 0% after: 200÷(Frequency X Prescale) sec.
	Cut-off Frequency at 0.5% FSO.
	– Transmitter P/S	12Vdc±8% Common to COM. (Terminal 4.)
		Max Load = 50mA.
Output	– Voltage	Field Programmable From 500mVdc to ±12Vdc.
		Maximum Output Drive = 10mA.
	– Current	Field Programmable From 1mAdc to ±20mAdc.
		Maximum Output Drive = 10Vdc. (500Ω @ 20mA.)
Power	– H	85~264Vac/dc; 50/60Hz; 5VA.
	– M	22~85Vac/dc; 50/60Hz; 5VA. 32Vac Min. When Using 12V TX. P/S.
	– L	10~28Vac/dc; 50/60Hz; 5VA
	– Circuit Sensitivity	<±0.001%/V FSO Typical.
Accurate to		<±0.1% FSO Typical.
Linearity & Repeatability		<±0.1% FSO Typical
Ambient Drift		<±0.01%/C FSO Typical
Noise Immunity		125dB CMRR Average. (1000Vdc Limit.)
EMC Compliances		Emissions EN 55022-A. Immunity EN 50082-1, <1% Effect FSO Typical
Safety Compliance		EN 60950
Mains Isolation		250Vac.
Isolation Test Voltages		Mains to Input/Output 3kVac 50Hz for 1min; Input to Output 1kVdc for 1min.
Response Time		(1/(FREQUENCY x PRESCALE)) + 0.2sec. Typical. (Except Time-out to 0%.)
Operating Temperature & Humidity		0~60C. (Storage Temp. -20~80C.) 5~85% RH Max. Non-Condensing.
Dimensions and Mounting		L=80, W=50, H=120mm. Mounts on 35mm Symetrical Mounting Rail.