-
OVERVIEW
Deploy quickly and easily with preconfigured settings
The HOBOnet Wireless Pulse Input Sensor connects to sensors with a pulse output. This sensor is compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. HOBOnet Wireless Sensors communicate data directly to the HOBO RX3000 weather station or pass data through other wireless sensors back to the central station. They are preconfigured and ready to deploy, and data is accessed through HOBOlink, Onset’s innovative cloud-based software platform.
Features
Sensor Features
- Maximum input frequency 120 Hz (120 pulses per second)
- Electronic solid-state switch closure or CMOS-level digital output
Wireless Features
- 922 MHz wireless mesh self-healing technology
- 450 to 600 meter (1,500 to 2,000 feet) wireless range and up to five hops
- Up to 50 wireless sensors per RX3000
- Simple button-push to join the HOBOnet wireless network
- Onboard memory to ensure no data loss
- Powered by rechargeable AA batteries and built-in solar panel
Important Information
Compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals. A complete system requires at least one HOBO RX3000 Remote Monitoring Station, a HOBOnet Wireless Manager, and a HOBOnet Wireless Sensor, OR one HOBO MicroRX Station (which has an integrated HOBOnet Wireless Manager) and a HOBOnet Wireless Sensor. HOBOnet Wireless Repeaters (RXW-RPTR-xxx or RXW-RPTR-B-xxx) can be added to extend the range.
-
SPECIFICATIONS
Sensor
Measurement Input
Frequency120 Hz (120 pulses per second) Measurement Range 0–65,533 pulses per logging interval Resolution 1 pulse Lockout Time 45 µs ±10% Recommended Input Type Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector) Preferred Switch State* Active low input Edge Detection Falling edge, Schmitt Trigger buffer (logic levels: low ≤0.6 V, high ≥2.7 V) Minimum Pulse Width 1 ms Input/Output Impedance 100 KΩ Open Circuit Input Voltage 3.3 V Maximum Input Voltage 3.6 V User Connection 24 AWG wires, 2 leads: white(+), black(-) Wireless Mote
Operating Temperature
Range-25° to 60°C (-13° to 140°F) with rechargeable batteries
-40 to 70°C (-40 to 158°F) with lithium batteriesRadio Power 12.6 mW (+11 dBm) non-adjustable Transmission Range Reliable connection to 457.2 m (1,500 ft) line of sight at 1.8 m (6 ft) high
Reliable connection to 609.6 m (2,000 ft) line of sight at 3 m (10 ft) highWireless Data Standard IEEE 802.15.4 Radio Operating
FrequenciesRXW-UCC-900 and RXW-UCD-900: 904–924 MHz
RXW-UCC-868 and RXW-UCD-868: 866.5 MHz
RXW-UCC-921 and RXW-UCD-921: 921 MHz
RXW-UCC-922 and RXW-UCD-922: 916–924 MHzModulation Employed OQPSK (Offset Quadrature Phase Shift Keying) Data Rate Up to 250 kbps, non-adjustable Duty Cycle <1% Maximum Number of
MotesUp to 50 wireless sensors or 336 data channels per one HOBO RX station Logging Rate 1 minute to 18 hours Number of Data Channels 2 Battery Type/
Power SourceTwo AA 1.2 V rechargeable NiMH batteries powered by built-in solar panel or two AA 1.5 V lithium batteries for operating conditions of -40° to
70°C (-40° to 158°F)Battery Life With NiMH batteries: Typical 3–5 years when operated in the temperature range -20° to 40°C (-4°F to 104°F) and positioned toward the
sun (see Deployment and Mounting), operation outside this range will reduce the battery service life
With lithium batteries: 1 year, typical useMemory 16 MB Dimensions Cable length: 6.5 m (21.3 ft.)
Mote: 16.2 x 8.59 x 4.14 cm (6.38 x 3.38 x 1.63 inches)Weight Cable: 250 g (9 oz)
Mote: 223 g (7.87 oz)Materials Mote: PCPBT, silicone rubber seal Environmental Rating Mote: IP67, NEMA 6 Compliance marks See User Manual • For maximum battery life, the pulse input sensors should be used with their preferred switch type. The sensors will
work with active high inputs (RXW-UCC-xxx) and normally closed switches (RXW-UCD-xxx), but battery life will not be
optimized. -
SENSORS
Onset have a complete range of HOBOnet wireless sensors and external Smart Sensors to suit the HOBO RX3000, RX2100 Range, U30, H21 and H22 Data Logger series.
HOBOnet Pulse Input – Electronic Switch Sensor
$578.00 ex GST
The HOBOnet Wireless Pulse Input Sensor connects to sensors with a pulse output. This sensor is compatible with electronic switch closures, such as FET or open-collector outputs, or CMOS-level logic signals.