Wireless Sensor Adapter – Adapt to any installation

The ALTA® Wireless Sensor Adapter enables Monnit Wireless Sensors to communicate with your local or online wireless sensor monitoring system by connecting to a PC or third-party IoT gateways via USB connection.

Plug into a PC

If an on-site PC has an active Internet connection, it’s simple to connect with iMonnit Sensor Configuration and Management Software online and install the free Monnit Gateway application. This combination allows you to pass sensor data to the online system.

With the online iMonnit software, you can easily configure your network, view collected sensor data, and set alarms through SMS or e-mail, all from any web-enabled browser. The system allows for complete configuration and customization at a sensor, local network, or client-wide level.

The ALTA wireless sensor adapter is specifically designed to respond to the increasing market need for global technology that accommodates several vertical M2M application segments and remote wireless sensor management solutions.

Learn more below about this remote monitoring solution that will help you tie Monnit’s Wireless Sensors to an existing Internet of Things platform.

 

USB
Type	USB 2.0 Full Speed Bus Standard
Display Name	Monnit USB Radio Gateway
Display Type	MonnitApnClass
Software Version	3.4.0.2 or later
Software Compatible Platforms	Microsoft Windows 10, 8, 7 or Vista required. (Windows XP and older are not supported.)
Bus Reported Device Description	M+ LINK
Memory Capacity	14,336 up messages (to gateway/server) 2,048 down messages (to sensors)
RS232 (optional)	115200 baudrate, 8 data bits, no parity, 1 stop bit, DB9 connector
Power
Power	Powered through USB output of PC (Optional) External Power (Optional) RS232 Power Pin 4 (Optional) RS232 Power Pin 8
Maximum Power Required	100 mA
Mechanical
Enclosure	ABS plastic
Dimensions	3.5 in. x 2.545 in. x 1.007 in.
Weight	4 ounces
Environmental
Operating Temperature	-40°C to +85°C
Wireless
Wireless Range	1,000+ ft. non-line-of-sight **
Security	Encrypt-RF (256-bit key exchange and AES-128 CTR)
Certifications	900 MHz product; FCC ID: ZTL- G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950.

*Hardware cannot withstand negative voltage. Please take care when connecting a power device.
**Actual range may vary depending on environment.