Sense the Signal Before Install

Do you want to know the best placement of your Wireless Sensors? The Site Survey Tool tells you the Sensors’ radio signal performance before you install them. Using the tool, you can know the places in your facility or your site where the signal is optimal for your Internet of Things (IoT) network.

The IoT data communications platform offers delivery and reception reliability up to and, in some places, more than 1200 feet through 12+ walls. When you perform a signal reliability test in any area with the Site Survey Tool, you see the precise TRUESIGNAL™ reliability percentage shown on its LCD along with an indication of Pass, Poor, or Fail.

TRUESIGNAL is an average measurement of signal strength while accounting for environmental interference like electrical work, cement and rebar, machines, and other wireless devices. Configure your preferred signal reliability settings in iMonnit—Mission-Critical, Strong, or Functional—depending upon the sensing environment, your use case, and how frequently you need sensor data.

Applications

The Site Survey Tool helps you plan the deployment of Wireless Sensors in:

• Environments with expansive open spaces of more than 1,200 feet (400 meters) and fewer obstructions, such as greenhouses, petrochemical plants, farms, etc.
• Buildings with extensive concrete, rebar, and square footage, such as high rises, skyscrapers, sports and concert arenas, stadiums, schools, hospitals, churches, etc.
• Warehouses with many obstructions, and shipping container and tractor-trailer yards

We recommend that your complex installations incorporate the Site Survey Tool to ensure smooth deployment and the most reliable RF network.

 

Power pack	Two replaceable AAA alkaline batteries
Supply voltage	2.0 – 3.8 VDC | Low battery displays if voltage < 2.6 VDC
Current consumption	0.8 μA (sleep mode), 0.7 μA (RTC sleep), 170 μA (MCU idle), 2.5 mA (MCU active), 7.61 mA (radio RX mode), 22.6 mA (radio TX mode)
Battery life	200 hours of active testing
Operating temperature range	-18°C to 55°C (0°F to 130°F) using alkaline -40°C to 85°C (-40°F to 185°F) using lithium
Operating humidity range	5 to 85% RH (non-condensing)
Altitude range (non-pressurized environments)	Operating: -15.2 to 1,982 m (-50 to 6,500 ft) Storage: -15.2 to 3,048 m (-50 to 10,000 ft)
Wireless protocol	ALTA Proprietary Frequency-Hopping Spread Spectrum (FHSS)
Wireless transmission power	50 mW (900MHz), 25 mW (868 MHz), 10 mW (433 MHz)
Wireless antenna type	1/2-wave dipole with RP-SMA connector
Wireless range	1,200+ ft non-line-of-sight (365+ m)*
Security	Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Enclosure	IP-67 enclosure, 76.6 x 123.6 x 20 mm (3.0 x 4.9 x 0.79 inch)
Weight	5.5 oz (155 g)
Certifications	900 MHz product: FCC ID: ZTL-G2SC1; IC: 9794A-G2SC1. 868 and 433 MHz products: ETSI EN 300 220 V3.2.1 (2018-06); ETSI EN 301 489-3 V2.2.0. (2021-11) All products tested and comply with: EN 61010-1; EN 55032: 2015/A11:2020; EN 55035:2017/A11:2020

*Actual range may vary depending on the environment.