-
OVERVIEW
Remotely monitor device voltage
Monnit’s 0–200 VDC or 0–500 VAC sensors measure the voltage between two electrical points, such as batteries or other sensors and measure the reported voltage. Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts. If a monitored value rises or falls beyond user-set thresholds, an alert is sent via text, email, or call. Know when essential appliances are operative (helpful for remote locations or decentralized operations).
By connecting the leads on the Monnit Wireless Voltage Meter to the positive and negative terminals of another device, battery, or sensor, it can measure the DC voltage and send data to the iMonnit Online Sensor Monitoring and Notification System. The data is stored in the online system and can be reviewed and exported as a data sheet or graph. Notifications can be set up through the online system to alert the user when certain thresholds have been met or exceeded.
Instant alerts, instant action
This sensor comes with an industrial battery included with the life of up to 7 years.
WARNING: Use caution when interfacing to the Monnit Wireless Voltage Meter. Negative voltages, AC Voltages, or DC Voltage exceeding maximum (as outlined in product specifications) WILL DAMAGE the electronics of the Monnit Wireless Sensor. Monnit is not responsible for troubleshooting, replacing or reimbursing damages incurred by disregarding this warning.
All industrial sensors are enclosed in a reliable, weatherproof NEMA-rated enclosure that are constructed for both indoor and outdoor use. These rugged enclosures protect the sensor circuitry against;
- Falling dirt
- Wind-blown dust
- Rain, sleet, snow, splashing water, and hose-directed water
- Ice formation on the enclosure
- Increased resistance to corrosion
Features
- Impressive wireless range of up to 1,200 feet through walls
- Frequency-hopping spread spectrum (FHSS)
- Improved interference immunity
- Improved power management for longer battery life
- Encrypt-RF® Security (Diffie-Hellman Key Exchange + AES-128 CBC for sensor data messages)
- Over-the-air updates
- Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email
- Stores 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle)
- 10-minute heartbeats = ~ 22 days
- 2-hour heartbeats = ~ 266 days
Applications
- Appliance Monitoring
- Line Power Monitoring
- Power Coupling Monitoring
- HVAC Systems Monitoring
- Power Supply Monitoring
- Sump Pump Monitoring
- Backup Generator Monitoring
- Machine Motor Monitoring
- Battery Health
-
GATEWAY
Gateway Options for Seamless IoT Data Communication
Monnit offers a range of gateway options designed to facilitate wireless sensor data communication within IoT networks. These gateways, serve as crucial conduits for transmitting sensor data to the iMonnit software platform and play a pivotal role in ensuring seamless and efficient data transmission for IoT applications.
Click here to explore the diverse range of gateway devices available >>
-
SOFTWARE
Manage Your Monnit Sensors with iMonnit Cloud-based Software
Monnit’s Sensor Monitoring Software, iMonnit, stands as a cutting-edge cloud-based platform and central hub tailored for the seamless management of Monnit sensors. With a focus on data security, all information is safeguarded on dedicated servers running Microsoft SQL Server. This intuitive online user interface serves as a command centre for arranging, monitoring, and modifying device settings to suit individual requirements.
OneTemp provides complimentary activation and setup services for new iMonnit accounts, while a free mobile app empowers users to maintain control at all times. Whether opting for the basic version or upgrading to iMonnit Premiere, users can unlock the full spectrum of features that enrich the Monnit experience.
Click here to explore the software options >>
-
SPECIFICATIONS
Technical Information – 200VDC Voltage Meter
Supply voltage 2.0-3.8 VDC (3.0-3.8 VDC using power supply) * Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F) Included battery Max temperature range -40° to +85°C (-40° to +185°F) Capacity 1200 mAh Absolute maximum range 250 VDC Accurate range 0-200 VDC Accuracy +/- (.1V + 1% of reading) Calibrated Accuracy +/- (.5V + .5% of reading) Input impedance 1.33 MOhm Response time 100 ms Leaded wire specification 2 Wires, 1 ft. (12 in), Red (+), Black (-), 22 AWG
(Custom lengths available upon request)Integrated memory Up to 3200 sensor messages Wireless range 1,200+ ft non-line-of-sight Security Encrypt-RF® (256-bit key exchange and AES-128 CTR) Weight 4.7 ounces Enclosure rating NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof UL rating UL Listed to UL508-4x specifications (File E194432) Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 *Circuit cannot withstand negative voltage. Please take care when installing batteries.
** Operation mode must be specified at time of purchase
*** If application exceeds 200 VDC the sensor will return a maximum reading of 200 V.Technical Information – 500VAC Voltage Meter
Supply voltage 2.0-3.8 VDC * Current consumption 0.2 μA (sleep mode), 0.7 μA (RTC sleep), 570 μA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) Operating temperature range (board circuitry and battery) -40°C to +85°C (-40°F to +185°F) Included battery Max temperature range -40° to +85°C (-40° to +185°F) Capacity 1500 mAh Accurate range 0-500 VACrms Absolute maximum input voltage 600 VACrms Accuracy +/- (1 Volt + 2% of reading) Calibrated accuracy +/- (.5 Volt + 1% of reading) Resolution .1 VACrms Input impedance 2 MOhm Response time ~ 1 Second Leaded wire specification 2 Wires, 1 ft (12 in), Black (Hot), White (Neutral), 18 AWG (Custom lengths available upon request.) Data logging Datalogs 2000 to 4000 readings if gateway connection is lost (non-volatile flash, persists through the power cycle):
– 10-minute heartbeats = ~ 22 days
– 2-hour heartbeats = ~ 266 daysWireless range 1,200+ ft non-line-of-sight Security Encrypt-RF® (256-bit key exchange and AES-128 CTR) Weight 4.7 ounces Enclosure rating NEMA 1, 2, 4, 4x, 12 and 13 rated, sealed and weather proof UL rating UL Listed to UL508-4x specifications (File E194432) Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and found to comply with: EN300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950 * Circuit cannot withstand negative voltage. Please take care when installing batteries.
Monnit Industrial Voltage Wireless Meter
$556.00 ex GST
Monnit’s 0–200 VDC or 0–500 VAC sensors measure the voltage between two electrical points, such as batteries or other sensors and measure the reported voltage.
NOTE: Gateway Required for Operation – Refer to Tab Below
