Features:

• Programmable via USB (requires the XU-USB programming key).
• No power supply or calibration required during programming.
• Zero trim pot for in field calibration
• Input Types:
  • RTD Pt100 and Pt1000.
  • Thermocouple B, E, J, K, L, N, R, S, T.
  • mA, mV and V.
  • Potentiometer.
  • 32 point curve fitter for mA, mV, V inputs.
• Input to Output Isolation 3750Vac.
• High Accuracy 0.1%.
• Reverse Polarity Protection.
• Heartbeat Status LED.
• Case Temperature range -20°C to +80°C.
• Compact DIN Rail Mount Enclosure.
• Easy to Install.
• Low Cost.

Note: Requires the XU-USB programming key, or OneTemp can calibrate to your requirements before dispatch.

Click here to Download FREE Programming Software

 

• Output 2 wire 4~20mA / or 20~4mA – Loop Powered.
• Power Supply 9.5~36Vdc.
• Supply Voltage Sensitivity <±0.005%/V FSO.
• Output Load Resistance 700Ω @ 24Vdc. (50Ω/V Above 9.5Vdc.)
• Maximum Output Current Limited to <28mA.
• EMC Emissions Compliance EN 61326
• EMC Immunity Compliance EN 61326
• Safety Compliance EN 61010-1
• Accurate to <±0.03% FSO Typical.
• Linearity & Repeatability <±0.02% FSO Typical. (Unless Individual Specifications State Otherwise)
• Ambient Drift <±0.003%/C FSO Typical.
• Noise Immunity 125dB CMRR Average. (2.0k Vdc Limit.)
• R.F. Immunity <1% Effect FSO Typical.
• Signal Isolation Voltage Between Input and Output 3750Vac for 1 min. (Excluding XU2HN)
• Response Time 400msec Typical. (From 10 to 90% 300msec Typical.)
• Sensor Fail Low 3.8mA, High 21mA
• Startup Time 3 seconds, 3.7mA output
• Output calibrate via Pot ±0.5mA Zero offset adjust. (Excluding XU2HN)
• Operating Temperature -20~85°C (XU2HN: -20~55°C)
• Storage Temperature -20~100°C
• Operating Humidity 5~85%RH Max. Non-Condensing.
• Mounting 35mm Symmetrical Mounting Rail. In Head mount for XU2HI & XU2HN
• Dimensions XU2: H=79, W=20, D=68mm. / XU2HI & XU2HN: H=44, W=44, D=23mm.