OVERVIEW
Track motor usage & runtimes with ease
The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This logger is ideal for tracking the usage & runtimes of motors, pumps, compressors, and other equipment. The HOBO UX90-004 Motor On/Off Logger is available in a standard 128 KB memory model capable of 84,650 measurements.
Features
- Dual internal motor sensors gives better sensitivity for well shielded motors
- External input for measuring mechanical contact closures when signal strength is low
- Auto-calibration of ON and OFF thresholds ensures reliable readings
Important Information
Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro USB Drive software purchase). See compatible items below
SPECIFICATIONS
Internal Motor Sensor
AC Magnetic Field Threshold >40 mGauss at 60 Hz External Input
External Contact Input Electronic solid state switch closure or logic driven voltage output Range 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered) Maximum State and Runtime
Frequency1 Hz Solid State Switch Closure Input Low: < 10 KΩ; Input High: > 500 KΩ Internal Weak Pull-Up 100 KΩ Input Impedance Solid state switch closure: 100 KΩ pull up Logger
Resolution Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event Memory Modes Wrap when full or stop when full Start Modes Immediate, push button, date & time, or next interval Stop Modes When memory full, push button, or date & time Time Accuracy ±1 minute per month at 25°C (77°F) (see Plot A of User Manual) Power Source One 3V CR2032 lithium battery and USB cable Battery Life 1 year, typical with logging intervals greater than 1 minute and
normally open contactsMemory 128 KB (84,650 measurements, maximum) Download Type USB 2.0 interface Full Memory Download Time 10 seconds for 128 KB; 30 seconds for 512 KB Logger Operating range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specificationLCD LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this rangeSize 3.66 x 8.48 x 1.52 cm (1.44 x 3.34 x 0.6 in.) Weight 30 g (1.06 oz) Environmental Rating IP50 CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).SOFTWARE
HOBOware Software
HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.
Learn more about HOBOware and HOBOware-Pro Features >>
HOBO UX90 Motor On/Off Logger 128K
$333.00 ex GST
The HOBO Motor On/Off data logger records motor on and off conditions within an AC magnetic field with its internal sensor, or mechanical contact closures from external sensing devices. This logger is ideal for tracking the usage & runtimes of motors, pumps, compressors, and other equipment.
