Plug-in magnetic-inductive flow transmitter with display

The transmitter can be used in liquids with a conductivity as of 20 μS/cm. Standardized fittings ensure simple insertion of the transmitter into pipes from DN 15 to DN 400. The output signal is 4 to 20 mA and the pulse frequency signal is 0 to 240 Hz.

Benefits:

• The flowmeter is based on the magnetic-inductive measurement method.
• Standardized fittings enable easy installation of the flow meter in pipes of DN 15 to DN 400.
• Application areas are neutral, contaminated, or aggressive liquids with a minimum conductivity of 20 μS/cm.
• Flow velocities of 0.2 to 10 m/s can be measured here which generate an output signal of 4 to 20 mA and a pulse signal of 0 to 250 Hz.
• Two relay outputs and a digital input expand the functionality of the device.
• The flow rate is measured by two independent counters.

Key Features

• Sensor without moving parts
• Display of the flow rate and volume
• Simulation of all output signals
• CIP capability
• FDA compliant materials

Applications

• Industrial wastewater treatment and recovery
• Irrigation
• Drinking water
• Monitoring cleaning cycles in the foodstuff industry

 

Measuring range	0.2 to 10 m/s
Nominal pressure	PN 16
Medium temperature	Max. 110°C
Nominal pipe width	DN 15 to DN 400
Inputs and outputs	4 to 20 mA; pulse frequency; 2 x switching output (relay); digital input
Measuring accuracy	≤ ± 3.5% of the measured value (standard calibration factor); ≤ ± 0.5% of the measured value (Teach-In)
Parts in contact with medium	Stainless steel 316L (1.4404); FKM or EPDM; PEEK
Protection type	IP65
Medium	Conductive liquids as of 20 µS/cm
Voltage supply	DC 18 to 36 V
Special features	With display
Accessories	T-fittings made of PVC or stainless steel; PE or stainless steel welded socket; PP connection clamps (type 406090)