-
OVERVIEW
Get peace of mind with reliable wind monitoring
The HOBO Wind Monitoring Station is an easy-to-deploy, low-cost cellular wind monitoring solution. The web-enabled HOBO® MicroRX station, together with the Davis Wind Speed/Direction Smart Sensor offers long-term, reliable monitoring of wind conditions.
With the introduction of the Ultrasonic Wind Speed/Direction Smart Sensor, you now have the option to upgrade your Wind Monitoring Station. Compact and rugged with no moving parts, it will make moving your station between sites even easier. Because this sensor is ultrasonic it is able to measure very low wind speeds, down to 0.4 m/s (compared to 1.0 m/s for our mechanical sensors). This sensor is also powered by its own built-in solar panel.
Configurable station-side alarms provide immediate notification of critical conditions, allowing you to easily maintain OH&S compliance, and the LI-COR Cloud IoT platform (formerly HOBOlink) makes it easy to view, access, and share your data.
Key Advantages:
- Integrated solar panel for easy long term deployment
- Remote access to data and current conditions with a customisable dashboard for analysis
- Alarm notifications via text/email when conditions reach user-set thresholds
- Inputs for five plug-and-play smart sensors
- Real-time monitoring with up to 10-minute connection rates via 4G cellular
Powerful Access to your Data in Real Time
LI-COR’s Cloud IoT platform (formerly HOBOlink), allows you to access your data anywhere on your mobile device or desktop. Customisable dashboards and easily-configurable alarms make your field data more accessible and meaningful. LI-COR’s Cloud IoT platform can send an email or a text/SMS message to your phone when conditions exceed set thresholds.
Please note: Ongoing yearly fees will be required after the initial 12 months for the Sim Plan as well as, access to the LI-COR’s Cloud IoT platform to manage your site.
What’s in the box?
- HOBO RX2102 MicroRX Station
- Grease packet
- Cable ties
- Screws and washers
- Battery pack
- Davis Wind Speed/Direction Smart Sensor OR Ultrasonic Wind Speed/Direction Smart Sensor
Note: Do you need a Relay Output that can be activated or pulsed in response to alarms? This option is available if you upgrade to the RX3000 Station, please contact us for further details. -
SPECIFICATIONS
HOBO MicroRX Station
To see the full specifications for this product, please see our product manual found under the documentation tab if available
Operating Range RX2101 and RX2103: -40° to 60°C (-40° to 140°F)
RX2102 and RX2104: -20° to 60°C (-4° to 140°F)Smart Sensor Connectors 5 Smart Sensor Network Cable Length 100 m (328 ft) maximum Smart Sensor Data Channels Maximum of 15 (some smart sensors use more than one data channel; see sensor manual for details) Logging Rate 1 minute to 18 hours Time Accuracy ±8 seconds per month in 0° to 40°C (32°F to 104°F) range;
±30 seconds per month in -40° to 60°C (-40° to 140°F) rangeBattery Type/Power Source RX2102 and RX2104: Integrated 1.7 watt solar panel and NiMH rechargeable battery pack; optional AC power adapter (P-AC-1) or external solar panel (SOLAR-xW) can be used in place of integrated solar panel
RX2101 and RX2103: 6 AA 1.5 V lithium batteries or AC power adapter (P-AC-1)Battery Life RX2102 and RX2104 Battery Life: Typical 3–5 years when operated in the temperature range -20° to 40°C (-4° to 104°F); operation outside this range will reduce the battery service life.
Maximum connection rates with built-in solar panel, in full sun:
- 10 minute connections year round for latitudes less than ±40°
- 10 minute connections through three seasons in other regions, reduced to 30 minute connections in winter
Maximum connection rates with external 5W or 15W solar panels:
- 10 minute connections year round, in full sun
- Connection rate with external solar panels may be less if deployed in partial sun
Battery life without solar recharging, with hourly connections and
1 minute logging:- RX2102: 3 months
- RX2104: 2 months
RX2101 and RX2103 Battery Life:
Battery life with daily connections:
- RX2101: 1 year with 1 minute logging
- RX2103: 1 year with 2 minute logging
Battery life with hourly connections and 1 minute logging:
- RX2101: 3 months
- RX2103: 2 months
Note: Deployments in areas with weak cellular strength could reduce battery life.
Memory 16 MB, 1 million measurements, continuous logging Alarm Notification Latency Logging interval plus 2–4 minutes, typical Enclosure Access Hinged door secured by two latches with eyelets for use with user-supplied padlocks LCD LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range Materials Outer enclosure: Polycarbonate/PBT blend with brass inserts; Interior: Polycarbonate/PBT; Gasket: Silicone foam; Cable channel: Santoprene™ TPE; U-Bolts (not included): Steel with zinc dichromate finish Dimensions 19.95 x 13.68 x 7.49 cm (7.85 x 5.39 x 2.95 in.) Weight 678 g (23.9 oz) Mounting Optional U-bolts are compatible with masts up to 4.14 cm (1.63 in.) mast diameter; can also be mounted with zip ties or mounted to a flat surface with screws Environmental Rating Weatherproof enclosure, NEMA 4X and IP66 (requires proper installation of cable channel system) Wireless Radio GSM/GPRS/EDGE: Quad band 850/900/1800/1900 MHz
UMTS/HSPA+: Seven band 800/850/900/1800/1900/2100 MHz
LTE: Twelve Band 700/800/850/900/1800/1900/2100/2600 MHzAntenna 4G LTE CE The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) FCC Logo | Australia/New Zealand General Compliance Mark FCC ID QIPPLS62-W, IC ID:7830A-PLS62W Davis Wind Speed/Direction Smart Sensor S-WCF-M003
Wind Speed/Gust Wind Direction Measurement Range 0 to 76 m/sec (0 to 170 mph) 0 to 355 degrees Accuracy ±1.1 m/sec (±2 mph) or ±5% of reading, whichever is greater ±7 degrees Resolution 0.5 m/sec (1.1 mph) 1 degrees (0 to 355 degrees) Starting Threshold ≤1 m/sec (2.2 mph) 1 m/sec (2.2 mph) Measurement Definition Cup revolutions are accumulated every three seconds for the duration of the logging interval Wind speed: Average speed for the entire logging interval
Gust speed: The highest three-second wind recorded during the logging interval
See Measurement Operation.
Unit vector averaging used; vector components for each wind measurement are calculated every three seconds for duration of logging interval (see Measurement Operation) Operating Temperature Range -40°C to 70°C (-40°F to 158°F) Environmental Rating Weatherproof Housing Polycarbonate wind cups UV-resistant ABS wind vane and black-anodized aluminum anemometer arm Bearing Type Sealed stainless steel Turning Radius 108 mm (4.25 in.) Approximately 135 mm (5.25 in.) Dimensions 470 x 191 x 121 mm (18.5 x 7.5 x 4.75 in.) Weight 1.332 kg (2 lb, 15 oz) Bits per Sample 8 for each channel, 24 total Number of Data Channels* 3 Measurement Averaging Option Automatic averaging (see Measurement Operation) Cable Length Available 3 m (9.8 ft) Length of Smart Sensor Network Cable* 0.5 m (1.6 ft) CE The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). Ultrasonic Wind Speed/Direction Smart Sensor S-WCG-M003
Wind Speed/Gust Wind Direction Measurement Range 0 to 41.16 m/s (0 to 92.07 mph) 0 to 359 degrees Accuracy ±0.8 m/s (1.79 mph) or ±4% of reading, whichever is greater 0.2 to 3 m/s (0.44–6.7 mph):
±4 degrees
>3 m/s (6.7 mph): ±2 degreesResolution 0.4 m/s (0.89 mph) 1 degrees (0 to 359 degrees) Measurement Definition Wind speed readings are taken every three seconds for the duration of the logging interval
Wind speed: Average speed for the entire logging interval
Gust speed: The highest three-second wind recorded during the logging interval
See Measurement Operation.Unit vector averaging used; vector components for each wind measurement are calculated every three seconds for duration of logging interval (see Measurement Operation) Operating Temperature Range Without Icing -15°C to 55°C (5°F to 131°F) Environmental Rating Weatherproof Housing Polyacetal Dimensions Sensor length: 380 mm (14.96 inches)
Sensor head diameter: 60 mm (2.36 inches)
Sensor rod diameter: 16 mm (0.63 inches)Weight 200 g (7 oz) Power Supply Photovoltaic panel, LIFEP04 3.2 V -600 mAh battery Bits per Sample 8 for each channel, 24 total Number of Data Channels* 3 Measurement Averaging Option Automatic averaging (see Measurement Operation) Cable Length Available 3 m (16.4 ft) Length of Smart Sensor Network Cable* 0.5 m (1.6 ft) CE The CE Marking identifies this product as complying with all relevant directives in the European Union (EU). -
LI-COR CLOUD (formerly HOBOLINK)
A web-enabled software for Remote Monitoring and HOBOnet Field Monitoring Systems.
A comprehensive cloud environmental monitoring platform for HOBO RX products, LI-COR Cloud IoT Platform (formerly HOBOlink) integrates near real-time, research-grade environmental data from RX stations into its single, intuitive platform’s robust tools.
Not sure which plan is right for you? For RX Devices, you can choose between three plans:
RX-BASIC RX-STANDARD RX-PREMIUM Description Value plan for up to 10 measurements with longer logging intervals Advanced monitoring capability with standard sensor support Advanced monitoring capability with best sensor support Max # of Measurements 10 25 Supports max sensors for each device added Fastest Logging Interval Every Hour Every 5 Minutes Supports each device’s max logging rate Remote access and monitoring via HOBOlink Included Included Included
HOBO Wind Alarm Kit
$0.00 NZD
The new HOBO Wind Monitoring Station is an easy to deploy, low-cost cellular solution, allowing you to reliably monitor and alarm wind conditions.
