-
OVERVIEW
Bright display for optimal visibility in harsh environments
Pixsys ATR144 Process Controller is a newly released controller in the 32x74mm size. It integrates recent Blue line standards that have been introduced with ATR244. Its bright display ensures optimal visibility in industrial environments and makes more information available for the operator as well as a scrolling Help function.
ATR144 is programmable by NFC with a dedicated App ‘MyPixsys’ for Android devices (same already in use for Pixsys latest product lines). this controller does not requiring wiring or power supply which allows for quick set-up/updates on site.
The controller as a multi-voltage power supply 24 to 230V AC/DC with galvanic isolation and does not require any hardware selection. Optional serial communication via RS485 with Modbus RTU/Slave protocol is also available.
-
SPECIFICATIONS
Main Features
Enclosure 32 x 74 (front) x 53 mm Power Supply 24..230 V AC / DC ±15% 50/60 Hz – galvanic isolation 2,5KV Consumption 5 VA Display 4 digits 0,38″ white + 5 digits 0,28″ red Environmental Conditions Temperature 0-45 °C, humidity 35..95 RH% Material Enclosure: PC UL94V2 self-extinguishing. Front: PC UL94V2 Weight approx. 120 g Sealing Front panel: IP65 (with gasket). Enclosure and terminal block: IP20 Quick Set-up Options Memory Card, LABSOFTVIEW software, EASY-UP codes APP / NFC Programming via APP (NFC) for Android devices Inputs
1 analogue / configurable Resolution 16bit, programmable for thermocouples K, S, R, J, T, N, B (automatic compensation of cold junction) -25..85°C, ±0,2% F.S. ±1 digit F.S.), Thermoresistances PT100, PT500, PT1000, Ni100, PTC1K, NTC10K (β 3435K), process signals 0..10 V (50000 points), 0/4..20mA (40000 points), 0..60 mV (25000 points), potentiometer 1..150 KΩ (50000 points) Sampling time Programmable till 2,1 ms (frequency up to 470 Hz) 1/2 Digital Setpoint change, Hold, Run, Tuning, Start / Stop, configuration lock Outputs
1/2 Relays 5 A – 250 V AC resistive 1 SSR 12 V DC – 25 mA max Serial Communication RS485 Modbus RTU – Slave (4800..115200 baud) Code “-T” Software Features
Control Algorithms ON – OFF with hysteresis, P., P.I., P.I.D., P.D. time-proportioned Tuning Manual or automatic Data Protection Lock of Command/Alarm Setpoints – Access to parameters by Password Alarm Modes Absolute/ threshold, band, upper/lower deviation, Alarms with optional manual reset and activation delay, Loop Break Alarm. Dual PID Heating / cooling PID Soft-Start Rising gradient programmable as Degree / hour or fixed output % Open/Close Logics Motorised valves
Pixsys ATR144 Controller
$256.00 ex GST
Pixsys ATR144 Process Controller is a newly released controller in the 32x74mm size. It is programmable via NFC, control and alarm functions, programmable analogue input, multi-voltage power supply, digital input, serial communication.
