This transmitter is still available however has been replaced with the: XU2

Features:

• Field Programmable Bi-Polar Input ranges.
• Isolated Input to Output 2.0kV.
• High Accuracy.
• 40~200mV Output Test Signal.
• LED Indication of Loop Current.
• Low Cost.
• Easy to Install.
• Compact DIN Rail Mount Enclosure.
• Available Standard or Special Calibration.
• Reverse Polarity Protection.

 

Input

• -Voltage 10mVdc to 150Vdc and Bipolar. (LPI-D-P is Field Programmable.)
  • Minimum Input Resistance = 200k
  • Maximum Over-range = 170Vdc Continuous.
• -Current 200Adc to 100mAdc and Bipolar. (LPI-D-P is Field Programmable.)
  • Input Resistance = 25
  • Maximum Overange = 120mAdc Continuous.
• -Damping 3 Second Selectable with H1. (LPI-D-P Only)

Output

• -mA 2 wire 4~20mA. (Loop Powered.)
• -mV Test 40~200mV ±1% @ 4~20mA. Other Test Voltages Available. e.g. 1~5V.
• Note. mV Test Increases Power Supply & Decreases Load Resistance.

Power Supply 8~33Vdc.

Supply Voltage Sensitivity <±0.005%/V FSO.

Output Load Resistance 800 @ 24Vdc. (50/V Above 8Vdc.)

Maximum Output Current Limited to <28mA.

Accurate to <±0.1% FSO Typical.

Linearity & Repeatability <±0.1% FSO Typical.

Ambient Drift <±0.02%/C FSO Typical.

Noise Immunity 125dB CMRR Average. (2.0kVac RMS Limit.)

EMC Compliances Emissions EN 55022-A. Immunity EN 50082-1, <1% Effect FSO Typical.

Isolation Test Voltages 2000Vac/dc Input to Output for 1min.

Response Time 200msec Typical. (10 to 90% 50msec Typical.)

Operating Temperature 0~70C.

Storage Temperature -20~80C.

Operating Humidity 5~85%RH Max. Non-Condensing.

Dimensions and Construction L=79, W=22.5, H=85mm. Polyamide Thermoplastic Rail Mount Enclosure.