DIN Rail mounted transmitters with universal inputs and outputs and optional detachable programmable front LCD Display/Keypad. Model 4501.

Features:

• Input for RTD, TC, Ohm, potentiometer, mA and V
• 2-wire supply > 16 V
• FM-approved for installation in Div. 2
• Output for current, voltage and 2 relays
• Universal AC or DC supply

The most universal of all universal DIN modules with 5 year manufacturer’s warranty.
Input for RTD, TC, Ohm, potentiometer, mA & V
2 wire transmitter supply > 16V on all models
Diagnostic Functions and fault analysis
Output for current, voltage- fwd and reverse scaleable
Two relays with delays on activate and deactivate
Universal AC or DC supply 20-250V
Display Tag Number or output value
Manual control of all outputs in SIMULATE mode
User-friendly – Scrolling text help on programming – cannot go wrong
Reliable – 5 year product warranty

LED display of module status – without the programmer The PReasy 4100 Series is designed to meet 80% of all normal interface applications, of sensor signal conversion, isolation of input, output and power supply to 2250V, and 2 trip alarm with fully programmable functions. In addition these are programmed by a low cost clip on multi-display module, with scrolling help text for all functions (with password protection). Everything is designed for ease of installation, programming, and fault finding.
Universal – 3 product variants cover hundreds of applications

 

Application	Standard
Function	Universal
Mounting	DIN rail
Input	0…20 mA 4…20 mA 0…10 VDC Pt100 Pt1000 TC types Potentiometer Linear resistance
Output	0…20 mA 4…20 mA 2 x SPST, AC: 500 VA
Supply	21.6…253 VAC / 19.2…300 VDC
Channels	1 input – 2 relays
Configuration	Programming front 4501
Features	Sensor error detection Isolation 2.3 kV NAMUR NE43 UP / DOWN Process calibration Process simulation Relay: Sensor error Relay: Hold Relay: Increasing / decreasing Auto-diagnostics TAG numbering Limit switch SIL 2-approved Relay: Latch