Plug-in magnetic-inductive flow transmitter

The transmitter can be used in liquids with a conductivity as of 20 μS/cm. Standardized fittings ensure simple insertion of the transmitter into pipes from DN 15 to DN 400. The output signal is 4 to 20 mA and the pulse frequency signal is 0 to 240 Hz.

Key Features

• The flow rate transmitter has a magnetically inductive sensor (MID).
• Standardized fittings ensure easy installation of the transmitter into tubes ranging from DN15 to DN400 (see Data Sheet 406090).
• The transmitter can be used in liquids with a conductivity of 20 μS/cm or greater. Flow speeds from 0.2 to 10 m/s can be measured.
• The transmitter provides an output signal of 4 to 20 mA.
• The measurement is also represented as a frequency pulse signal of 0 to 240 Hz.
• Simple control tasks can be implemented with the installed relay.
• Stainless steel design.
• Simple mounting.
• For pressures up to PN16 and temperatures up to 150°C.

 

Measuring range	0.2 to 10 m/s
Nominal pressure	PN 16
Medium temperature	Max. 150°C
Nominal pipe width	DN 15 to DN 400
Outputs	4 to 20 mA; pulse frequency; switching output (changeover contact relay)
Measuring accuracy	≤ ± 3.5% of the measured values (standard calibration factor); ≤ ± 0.5% o the measured value (Teach-in)
Parts in contact with medium	Stainless stell 316L (1.4404); FKM or EPDM; PEEK
Protection type	IP65
Medium	Conductive liquids as of 20 µS/cm
Voltage supply	DC 18 to 36 V
Accessories	T-fittings made of PVC or stainless steel; PE or stainless steel welded socket; PP connection clamps (type 406090)