-
OVERVIEW
- Programmable via USB (requires the XU-USB programming key).
- No power supply or calibration required during programming.
- Zero trim pot for in field calibration
- Temperature Input Types:
- RTD Pt100 and Pt1000.
- Thermocouple B, E, J, K, N, R, S, T.
- Output is Linear with Temperature.
- High Accuracy 0.1%.
- Compact Industrial Head Mount Enclosure.
- Reverse Polarity Protection.
- Easy to Install.
- Low Cost.
USB Programmable RTD or Thermocouple Temperature Input.
Standard = RTD Pt100, 0~100°C Input; Upscale; 4~20mA Output (Loop Powered).
Input to Output Isolation 3750Vac.
Heartbeat Status LED.
Case Temperature range -20°C to +85°C.USB Programming Key
Note: the same XU-USB can be used to program any of the XU Series Transmitters – just change the included cable type for DIN or In-Head!Note: Requires the XU-USB programming key.
Download the Free Programming Software -
SPECIFICATIONS
- Output 2 wire 4~20mA / or 20~4mA – Loop Powered.
- Power Supply 9.5~36Vdc.
- Supply Voltage Sensitivity <±0.005%/V FSO.
- Output Load Resistance 700Ω @ 24Vdc. (50Ω/V Above 9.5Vdc.)
- Maximum Output Current Limited to <28mA.
- EMC Emissions Compliance EN 61326
- EMC Immunity Compliance EN 61326
- Safety Compliance EN 61010-1
- Accurate to <±0.03% FSO Typical.
- Linearity & Repeatability <±0.02% FSO Typical. (Unless Individual Specifications State Otherwise)
- Ambient Drift <±0.003%/C FSO Typical.
- Noise Immunity 125dB CMRR Average. (2.0k Vdc Limit.)
- R.F. Immunity <1% Effect FSO Typical.
- Signal Isolation Voltage Between Input and Output 3750Vac for 1 min. (Excluding XU2HN)
- Response Time 400msec Typical. (From 10 to 90% 300msec Typical.)
- Sensor Fail Low 3.8mA, High 21mA
- Startup Time 3 seconds, 3.7mA output
- Output calibrate via Pot ±0.5mA Zero offset adjust. (Excluding XU2HN)
- Operating Temperature -20~85°C (XU2HN: -20~55°C)
- Storage Temperature -20~100°C
- Operating Humidity 5~85%RH Max. Non-Condensing.
- Mounting 35mm Symmetrical Mounting Rail. In Head mount for XU2HI & XU2HN
- Dimensions XU2: H=79, W=20, D=68mm. / XU2HI & XU2HN: H=44, W=44, D=23mm.
Intech XU2HI – Head Mount Transmitter – RTD+Thermocouple Input, 4-20mA Output
$260.00 ex GST
Suitable for head mounting on RTD and Thermocouple Temperature Sensors to convert the signal to 4-20mA (Loop Powered, This model Features a Zero trim pot for in field calibration and is also Isolated.
