Only compact meter for a quick measurement of potassium ion using ion selective membrane.Flat sensor technology and 60 years of sensor engineering realizes a reliable and direct measurement of a drop of the sample from 0.3mL. Use sampling sheet (sold separately) to measure down to 0.05mL or more.Unique sensor mechanism realizes direct measurement of solid, viscous, powder samples. No need for a beaker to calibrate or measure. Just drop the standards and sample on the flat sensor, saves you time and minimize wasting your precious sample.This lightweight, pocket-sized meter is suitable for research and industrial applications in diverse fields.

Applications include:
Soil and sap testing for improved agriculture; food testing*

* Detection of ions in water only; electrolytes in oils cannot be measured. Ion measurement can be affected by non-target ions.

 

Model	K-11
Measurement Principle	Ion electrode method
Minimum Sample Volume	0.3mL or more*1
Measurement Range	4 to 9900ppm(mg/L)
Range & Resolution (Valid Numbers)	①0 to 99ppm : 1ppm ②100 to 990ppm : 10ppm ③1000 to 9900ppm : 100ppm
Calibration	Two-point*4
Accuracy	±10% of reading value.*5
Functions	Auto range change・Temperature compensation・Waterproof*6・Reading locking ・Automatic power off （30 minutes）
Display	Custom (monochrome) Digital LCD with backlight
Operating Temperature/Humidity	5 to 40˚C, 85% or less in relative humidity  (no condensation)
Power	CR2032 batteries (x2)
Battery Life	Approx. 400 hours in continuous use
Main Material	ABS epoxy
Dimensions/Match	164mm × 29mm × 20mm  (excluding projections)　/ Approx. 50 g (meter only, without batteries)
Accessories	2 CR2032 batteries/1 Pipette/Instruction manual/Quick manual/Storage case/Standard solution (150ppm&2000ppm)(14mL)/5 pieces of Sampling sheetB

*1 Smaller amount(0.05mL or more) can be measured with the sampling sheet B. (Please close the light shield cover. If a sample that contain particulate, please use ”Sampling sheet holder” (sold separately))
*2 With soil/water sampling ratio of 1:5.
*4 Selectable between one-point and two-point calibrations.
*5 Repeatability in measurement of a standard solution after calibration using the same standard solution.
*6 IP67：no failure when immersed in water at a depth of 1 meter for 30 minutes. But the product can not be used underwater.