Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Intech LPI-LCD-6 - 4-20mA Loop Powered Indicator

The LPI-LCD-6 - 4~20mA Panel Display is ideal for displaying a variety of process variables, and is easy to scale to your required engineering units and is powered from a 4-20mA loop so no additional power is required.
Part Number: LPI-LCD-6
$513.00 ex GST
[$564.30 inc GST]

Description:

The LPI-LCD-6 - 4~20mA Panel Display is ideal for displaying a variety of process variables, and is easy to scale to your required engineering units.

Features:

  • Easy installation (front mounting unit takes up virtually no space behind the panel).
  • Loop powered display backlight.
  • Protection against reverse wiring and accidental 24V supply.
  • Easy calibration via on-screen menu.

Ordering Information:

LPI-LCD-6 One 4~20mA Loop Powered Input Panel Mount Display.

Description:

The LPI-LCD-6 - 4~20mA Panel Display is ideal for displaying a variety of process variables, and is easy to scale to your required engineering units.

Features:

  • Easy installation (front mounting unit takes up virtually no space behind the panel).
  • Loop powered display backlight.
  • Protection against reverse wiring and accidental 24V supply.
  • Easy calibration via on-screen menu.

Ordering Information:

LPI-LCD-6 One 4~20mA Loop Powered Input Panel Mount Display.

Specifications:

Input configuration: 4~20mA Loop Powered.
  Minimum Input: 3.5mA.
  Maximum Input: 100mA.
  Load: 220Ω Typical.
Full scale range: Adjustable Between -99,999 and +999,999.
Max Resolution: 50,000 Counts.
A/D Conversion: 16bit Sigma Delta.
Accuracy: ±0.02%.
Temperature Coefficient: 30ppm/°C Typical.
Conversion Rate: 10 Readings per Second.
Protection: Reverse Polarity. Accidental 24V Supply.
Display: Liquid crystal display (LCD) 17.5mm.
  Units: Standard KG, LB, T, or Custom.
  Decimal point: Up to 4 Decimal Places.
  ±Over-Range: Shows ‘UNDER’ or ‘OVER’.
Operating temperature: -10°C to +60°C.
Relative humidity: 10~85%RH (non-condensing).
Power Supply: Designed to be powered from the 4~20mA current loop input signal.
Display: 17.5mm LCD.
  Units: Standard KG, LB, T or Custom.
  Decimal: Up to 4 Decimal Places.
  ±Over-Range: Shows 'UNDER' or 'OVER'.
Housing: Rating IP65.
Case dimensions: 144 x 72 x 25mm (WxHxD).

Online store by DBG Technologies, powered by LiveCube