Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Explore the potential of IoT in enhancing workspace efficiency and sustainability - Try a POC kit today >>

Menu
Search
Search Our Catalogue Close
Shopping cart Close
Menu Close
All Categories

    Calex FibreCube - Fibre Optic Pyrometer

    Manufacturer:
    The FibreCube is a high-performance temperature measurement device with fast response time, precise readings, and versatile features. It offers temperature ranges from 100°C to 2,000°C and comes with a miniature fibre optic sensing head and optional display unit for ease of use.
    Part Number: FibreCube
    Back to Previous Page
    Product Files
    Call for pricing

    High-performance fibre optic pyrometer

    The FibreCube provides fast and precise temperature measurements in demanding applications.

    Measurements as low as 100°C are possible, with a response time of just 1 ms. The sensing head contains no electronics, and may be used in ambient temperatures of up to 150°C with no need for cooling.

    Very small objects can be measured. A measurement spot as small as 0.4 mm is available with standard optics, and even smaller with special optics.

    For measuring small targets at long distances, the FibreCube is the most capable of any Calex sensor, with measured spot sizes as small as 6 mm at 1 metre distance.

    A built-in bright green LED aiming light illuminates the exact size and location of the measured spot, so the sensor is easy to aim with total precision.

    The fibre optic cable is made to order, with lengths of up to 10 m or 28 m available depending on the model. The length can be specified to the nearest metre.

    All models can measure through glass or quartz viewport windows.


    Features

    • Temperature ranges from 100°C to 2,000°C
    • Miniature fibre optic sensing head for ambient temperatures up to 150°C
    • Choice of precision optics and through-lens LED aiming light
    • Extremely fast 1 ms response time
    • Short measurement wavelength for improved performance on reflective metal surfaces, compared with general-purpose models
    • 4-20 mA, voltage, alarm outputs
    • RS-232 communications
    • Optional display and configuration unit

    Target size and distance are critical to accuracy for most IR thermometers

        


    Each optics option is available for one FibreCube temperature range only (M, L, or H). For example: for FC-AM sensors, choose from the “M” optics. Note: Smaller measured spot sizes are available. If these options are not suitable, contact Calex to discuss special optics. The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Accuracy specifications are valid up to the maximum distances shown.

    Touch Screen Interface

    Optional wall-mounted display, data logging, configuration and alarm unit for FibreCube sensor

    • Read the temperature
      The large, bright backlit temperature display is visible from a distance and turns red in an alarm condition.
    • Record the temperature history
      See a graph of the measured temperature, and log more than a year of data to a single MicroSD Card. The data is stored in a simple text format that can be imported easily into Excel.
    • Configure the sensor
      All the sensor’s configuration settings can be adjusted via the intuitive touch screen interface.
    • Trigger temperature alarms
      Two alarms are individually configurable as high, low, band or error. The screen turns bright red to signal an alarm condition, and the built-in 24 V, 1 A relay outputs can be connected directly to alarm sounders and beacons.
    • Accurate measurements, even with reflections of hot objects
      Place the sensor outside an oven or furnace and accurately measure the temperature of objects inside by using the Reflected Energy Compensation feature.



    PM030 Specifications
    Inputs 1 x FibreCube or PyroCube sensor (any model)
    Outputs Retransmitted analogue output from sensor, and
    2 relays, rated 24 V DC, 1 A
    Display Format 2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
    Touch Screen Display Format 2.83” (72 mm) resistive touch TFT, 320 x 240 pixels,
    backlit
    Storage MicroSD Card (optional), max. 32 GB, equal to 16 years of
    data at the fastest sample rate of 1 per second
    Data Logging Interval 1 second to 1 day (configurable)
    Internal Clock Batrtery 1 x BR 1225 3V (not included)
    Variables Logged Instantaneous target temperature, hold temperature,
    alarm events
    File Format .csv
    Configurable Parameters (Data Logging) Sample period
    Number of samples
    Scheduled start
    Configurable Parameters (Alarm Logging) Log times when triggered, acknowledged, reset
    Log data while triggered



    Configurable Parameters
    Languages English, Chinese (simplified), Japanese
    Temperature units °C/°F
    Displayed temperature
    LED sighting on/of
    Password
    Date & time (for data logging time stamps)
    Peak hold period, decay level
    Averaging period
    Correction (gain/offset)
    Emissivity setting (with teach function)
    Reflected energy compensation (with teach function)
    Output type
    Output temperature range
    Polarity on error
    Alarm mode, levels, hysteresis

    Typical Applications


    Welding preheat

    Instantly and accurately measure the preheat temperature of steel surfaces before they are welded.


    Finishing and coating

    Measure the preheat temperature of bare metal surfaces on small parts before they are coated.


    Tools and machine shafts

    Small, bare metal machine parts such as cutting tools, bearings and shafts can be monitored without contact.

    Technical Information

    Temperature Ranges
    Application Model Measurement Temperature Range Model Measurement Temperature Range Model Measurement Temperature Range
    Low Temperature FC-TL 100°C to 1500°C FC-PL 220 to 1650°C FC-AL 500 to 2000°C
    High Temperature FC-TM 180°C to 2000°C FC-PM 300 to 2000°C FC-AM 600 to 2000°C
    High Temperature with smallest measured spot FC-TH 240°C to 2000°C FC-PH 400 to 2000°C FC-AH 700 to 2000°C
    * Depending on ambient temperature and fibre optic cable length - see Minimum Measurable Temperature
    Spectral response 2.0 to 2.5 μm 0.8 to 1.6 μm 0.8 to 1.0 μm



    General Specifications
    Aiming Light Green LED, through-lens (shows size and location of
    measurement area)
    Accuracy* Measurements below 800°C: ±4°C
    800°C to 1200°C: ±0.5% of reading
    1000°C to 2000°C: ±1.0% of reading
    Repeatability* ±2°C ±0.2% of reading
    Measurement Resolution* Measurements within 50°C of minimum of
    measurement temperature range: 3°C
    Measurements within 50°C of minimum of
    measurement temperature range: 1°C
    Otherwise: 0.5°C
    Response Time (95%) Analogue output: 0.001 to 5 s
    Adjustable via averaging function
    Warm Up Time 1 minute
    Analogue Output Type 4 to 20 mA (set by default)
    Can be changed via PM030 or RS-232 to:
    0 to 20 mA, mV/°C, or 0 to 1 V DC
    Other voltage output ranges available: contact Calex
    RS-232C Communications Output swing width: ±4 V approx.
    Baud rate: 4800, 9600, 19200, 38400, 57600, 115200
    bps (selectable)
    Alarm Output Open drain, 27 V DC, 0.2 A
    Alarm Hysteresis Adjustable, 0°C to 99.9°C
    Peak Hold 0.01 to 10 s, time or discharge mode, configurable
    Emissivity Setting Adjustable, 0.3 to 1.0 (default setting 0.95) in 0.001
    increments
    Emissivity may be set as low as 0.05 with reduced
    accuracy
    Supply Voltage 4.7 to 27 V DC, 0.1 A max



    Mechanical Specifications
    Output Cable Length 2 m, 5 m, or 10 m according to
    model number
    Fibre Optic Cable Length According to model number:
    1 m to 10 m (L models)
    1 m to 28 m (M and H models)
    Construction Sensing head and electronics
    module: Anodised aluminium
    Fibre optic cable jacket: Stainless
    steel
    Minimum Bend Radius (fibre optic cable) L models: 150 mm
    M and H models: 70 mm



    Environmental Specifications
    Ambient (operating) Temperature Range Fibre optic cable and sensing
    head: 0°C to 150°C
    Electronics module: 0°C to 50°C

    Minimum Measurable temperature (FC-T models only) 

    Depending on ambient temperature (sensing head)

    		 Ambient temperature: Up to 50°C
    Minimum measurable
    temperature: 100°C
    Ambient temperature: Up to 70°C
    Minimum measurable
    temperature: 160°C
    Ambient temperature: Up to
    120°C
    Minimum measurable
    temperature: 240°C
    Storage Temperature Range -15°C to 70°C
    Ambient Humidity 30% to 85% RH non-condensing

    High-performance fibre optic pyrometer

    The FibreCube provides fast and precise temperature measurements in demanding applications.

    Measurements as low as 100°C are possible, with a response time of just 1 ms. The sensing head contains no electronics, and may be used in ambient temperatures of up to 150°C with no need for cooling.

    Very small objects can be measured. A measurement spot as small as 0.4 mm is available with standard optics, and even smaller with special optics.

    For measuring small targets at long distances, the FibreCube is the most capable of any Calex sensor, with measured spot sizes as small as 6 mm at 1 metre distance.

    A built-in bright green LED aiming light illuminates the exact size and location of the measured spot, so the sensor is easy to aim with total precision.

    The fibre optic cable is made to order, with lengths of up to 10 m or 28 m available depending on the model. The length can be specified to the nearest metre.

    All models can measure through glass or quartz viewport windows.


    Features

    • Temperature ranges from 100°C to 2,000°C
    • Miniature fibre optic sensing head for ambient temperatures up to 150°C
    • Choice of precision optics and through-lens LED aiming light
    • Extremely fast 1 ms response time
    • Short measurement wavelength for improved performance on reflective metal surfaces, compared with general-purpose models
    • 4-20 mA, voltage, alarm outputs
    • RS-232 communications
    • Optional display and configuration unit
    Related products
    Picture of Calex PyroMini - Infrared Temperature Sensor

    Calex PyroMini - Infrared Temperature Sensor

    The Calex PyroMini is a Miniature Infrared Temperature Sensor with Separate Electronics Module & Optional Touch Screen Interface, 4 to 20 mA or RS485 output and alarm relay outputs.
    call for pricing
    Picture of Calex PyroUSB - USB Configurable Infrared Temperature Sensor

    Calex PyroUSB - USB Configurable Infrared Temperature Sensor

    PyroUSB Series infrared pyrometers measure temperatures accurately from -40°C to 2000°C. Suitable for various applications, these models offer easy installation, are PC Configurable and have 4-20 mA Output
    call for pricing
    Picture of Calex ABS - Small Adjustable Mounting Bracket

    Calex ABS - Small Adjustable Mounting Bracket

    The adjustable mounting bracket consists of a fixed mounting bracket plus another L-shaped bracket. When assembled as shown the adjustable mounting bracket offers a rigid support for the sensor and allows fine adjustment in two planes.
    $60.00 (ex gst)
    Picture of Calex FBS - Small Fixed Mounting Bracket

    Calex FBS - Small Fixed Mounting Bracket

    The L-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine adjustment in a single plane.
    $27.00 (ex gst)
    Picture of Calex Small Protective Plastic Window

    Calex Small Protective Plastic Window

    When fitted over the lens of the sensor, the protective plastic window in stainless steel holder provides mechanical protection
    $111.00 (ex gst)
    Picture of Calex Air purge collar - Large

    Calex Air purge collar - Large

    The air purge collar is used to keep dust, fumes, moisture and other contaminants away from the lens. Air flows into the fitting on the side and out of the aperture at the front.
    $139.00 (ex gst)

    Quality Guaranteed

    Information
    My account
    Customer service

    Safe & Secure Payments

    Quality Guaranteed

    Copyright © 2024 Onetemp. All rights reserved.