Search
Menu Close

Intech PSW-10-F - Instrument Power Supply 24Vdc, 1.0A

Manufacturer:
The PSW-10-F is an instrument quality isolated switch mode power supply, with an output voltage of 24Vdc and up to 1.0A continuously.
Part Number: PSW-10-F
Back to Previous Page
$44.00 ex GST
i h

Description:

The PSW-10-F is an instrument quality isolated switch mode power supply, with an output voltage of 24Vdc and up to 1.0A continuously.
Due to advancements in Switch Mode Power Supply technology, special techniques have been developed that make the PSW-10-F both very low noise and high precision. Both line and load regulation is better than 1% over all conditions. These attributes make the PSW-10-F better than most comparable linear power supplies.

Features:

  • Power Supply 24Vdc
  • Output current of 1.0A
  • DC Output OK Signal
  • Mains Input 100~264Vac
  • LED Power On Indication
  • Short Circuit, Voltage & Current Overload Protection
  • Isolated output floats close to earth potential
  • Compact DIN rail mount enclosure
  • Cooling by Free Air Convection
  • Low cost

Ordering Information:

PSW-10-F Instrument Power Supply: Output Voltage: 24Vdc, 1.0A.

Specifications:

Input voltage Supply:   100~264Vac, 47~63Hz.
    140~370Vdc.
Output: Voltage 24Vdc.
  Voltage Adjust 21.6~26.4Vdc.
  Current 1.0A max.
  Ripple 150mVp-p.
  Load Regulation ±1.0%.
  Line Regulation ±1.0%.
  Voltage Tolerance ±1.0%.
  Active OK Signal 18~27Vdc, 20mA.
Protection: Overload 105~160%.
  Over Voltage 27.6~32.4Vdc.
Safety: Complies With UL508, TUV EN60950-1.
  Isolation Between Input, Output and Earth: 100MΩ, 500Vdc.
  EMC Emission EN55011, EN55022 (CISPR22).
  EMC Immunity EN55024.
Environment: Operating Temperature -20~70°C.
  Storage Temperature -40~85°C.
  Operating Humidity 20~90% RH.
  Storage Humidity 10~95% RH.
Mounting:   35mm symmetrical DIN rail.
Dimensions:   92 x 22.5 x 100mm (HxWxD).

Description:

The PSW-10-F is an instrument quality isolated switch mode power supply, with an output voltage of 24Vdc and up to 1.0A continuously.
Due to advancements in Switch Mode Power Supply technology, special techniques have been developed that make the PSW-10-F both very low noise and high precision. Both line and load regulation is better than 1% over all conditions. These attributes make the PSW-10-F better than most comparable linear power supplies.

Features:

  • Power Supply 24Vdc
  • Output current of 1.0A
  • DC Output OK Signal
  • Mains Input 100~264Vac
  • LED Power On Indication
  • Short Circuit, Voltage & Current Overload Protection
  • Isolated output floats close to earth potential
  • Compact DIN rail mount enclosure
  • Cooling by Free Air Convection
  • Low cost

Ordering Information:

PSW-10-F Instrument Power Supply: Output Voltage: 24Vdc, 1.0A.

Customers who bought this item also bought

Magnelab Three-Phase RopeCT - Rogowski coil AC Current Sensor

Magnelab Three-phase flexible RopeCT® Rogowski Coils measure AC current up to 5,000 Amps. The coils open at the connector junction and can be installed on an existing cable or buss-bar in a matter of seconds.
from $822.00 (ex gst)

CCS CTRC Series Rogowski Coil Current Transformers

The CTRC Rogowski coil current transformers are accurate, flexible, rope-like current sensors that can be connected around conductors.
from $378.00 (ex gst)

Rogowski Coil Current Transformer 400 Amp - CTRC-03100-0400

$513.00 (ex gst)