JUMO Transmitters for SIL and Ex

Intuitive operation and excellent reliability

The new JUMO dTRANS T06 Ex multifunction four-wire transmitter in a mounting rail case is suitable for use in challenging SIL and Ex applications.

Its measurement input features 22-bit resolution with selectable noise suppression and is extremely precise. The SIL option fulfills the requirements of SIL 2 / SIL 3 according to DIN EN 61508 and PL c / PL d according to DIN EN ISO 13849. The JUMO dTRANS T06 Ex also meets the ATEX and IECEx requirements up to zone 0.

A particularly high galvanic isolation guarantees excellent signal stability, even when measuring conditions are difficult. Intuitive operation takes place via 4 keys and an LCD display, which can also be used to display information about the measuring point. Reliable SIL configuration is facilitated by an easy-to-use setup program. As a special feature, the device display can also be used to access a connection diagram that is based on the configuration.

The device can be used with RTD temperature probes, thermocouples, resistance transmitters, as well as voltage and current signals. It converts the input signal into an output signal (0(2) to 10 V or 0(4) to 20 mA). The universal measurement input with 22-bit resolution ensures maximum measuring precision with the JUMO dTRANS T06 Ex.

The compact mounting rail case, which has a design width of just 22.5 mm,and the encoded plug-in terminals enable the device to be quickly installed into control cabinets. In addition, the device can be reliably replaced when performing calibration and maintenance work. All the important information regarding the transmitter can be queried and visualized via an RS485 interface.

 

Galvanic isolation	1.8 kV
Installation	Mounting rail 35 mm × 7.5 mm according to DIN IEC 60715
RTD temperature probe input	Pt50, Pt100, Pt500, Pt1000, Ni100, Ni500, Ni1000, Cu50, Cu100, two/three/four-wire circuit
Thermocouple input	L, J, U, T, K, E, N, S, R, B, C, A1, D, L, Chromel® Alumel®, PLII, 0 to 1 V
Ambient temperature	-10 to +70 °C
Output	0(2) to 10 V or 0(4) to 20 mA (invertible)
Special features	Universal input for a number of sensors and standard signals, intuitive operation and configuration on the device or via USB interface with setup program, RS485 interface with Modbus RTU, intelligent additional functions such as min/max drag indicator, operating hours counter and output simulation SIL 2/SIL 3 according to DIN EN 61508 and PL c/d according to ISO 13849, Ex approval according to ATEX and IECEx, sensor matching for RTD temperature probe, customer-specific linearization, high degree of galvanic signal separation, connection diagram available in the display
NAMUR compliant	NE 43
Voltage supply	DC 24 V (four-wire transmitter)
Calibration accuracy	± 0.05 %
Configuration	On the device via USB interface with PC setup program
Approval	SIL and PL, cUL, ATEX, IECEx