OVERVIEW
The AC Voltage transmitter is a self-powered transformer for monitoring sine wave and single-phase AC voltage. Available in two ranges: 0 to 150 Volts AC, and 0 to 300 Volts AC.
Requirements for use with specific data loggers:
- HOBO MX1100 series: a 4-20mA input cable (SD-MA-420)
- HOBO U12, UX120-006M, or ZW series: a 4-20mA input cable (CABLE-4-20mA)
Features
- Available in 2 ranges: 0 to 150 & 0 to 300 Volts AC
- Requires an input cable (part # CABLE-4-20mA)
Important Information
Refer to data logger product pages to ensure you have the proper interfaces (modules, adapter, etc.) to deploy this sensor.
SPECIFICATIONS
Ranges 0-150 and 0-300 volts RMS Sensor Accuracy < ±0.1% of span (20% to 120% of range) ±0.25% of span (10% of range) Over Range +20% of span Over Load +40% of span Frequency 60 Hz AC Supply Self-powered Output 0–20 mA Response time to 90% <240 msec=”” td=””> Operating conditions -20° to 70°C (-4° to 158°F); 5-95% RH, non-condensing Housing Plastic Carbonate Protection Level
Box According to IP-50 DIN 40050 Terminals According to IP-10 DIN 40050 Mounting Standard 35mm DIN rail Notes: Because these sensors tie directly into the line, they should be used only by qualified personnel.
Requirements
For U12 & H8 Loggers: Input Cable (Part # CABLE-4-20mA)
For HOBO Energy Logger: FlexSmart Analog Module (Part # S-FS-CVIA)
HOBO – ConLab 0-300 Volt AC Transmitter Sensor
$573.00 ex GST
A self-powered transformer for monitoring sine wave and single-phase AC voltage; compatible with HOBO MX1100, UX120-006M, ZW series, and U series data loggers.
