Search
Menu Close

Monnit Ethernet Gateway

Manufacturer:
The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
Part Number: MNG2-4-EGW-CCE
Back to Previous Page
$613.00 ex GST
i h

Monnit's Ethernet Gateway: Ready in minutes for secure connections 

Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.


PoE Splitter

If you have a Monnit Ethernet Gateway that doesn’t support Power over Ethernet (PoE), the PoE Splitter allows you to use an existing PoE line to power and communicate with the gateway. The PoE Splitter works by simply separating the power from the data and feeding it to a different input that a non-PoE-enabled device like a gateway can use.


Suggested Application Uses for This Sensor

  • Transmits sensor data to the iMonnit online sensor monitoring portal
  • Commercial monitoring applications
  • Facilities monitoring
  • Small business monitoring
  • Large business monitoring


IMPORTANT 

The Gateway is an integral component as it relays data collected by sensors to the software. For further information, please refer to the tabs above


Online Sensor Monitoring Software

iMonnit is a cloud based mobile internet platform and central hub for managing Monnit and ALTA products. All data is secured on dedicated servers operating Microsoft SQL Server. This online user interface is where all your device settings can be arranged, supervised, and modified to reflect your unique environment. OneTemp will look after the activation and setup of your new online iMonnit account free of charge. There is also a free mobile app for you to stay in control at all times. Start with the basic version or upgrade to iMonnit Premiere to enjoy the full features your Monnit experience can offer.


iMonnit Basic Vs Premiere:

  • Basic - Free with no ongoing costs
    Monnit Basic is included for free with all wireless sensors, providing basic features for you to configure and monitor your sensors online. These basic features only support one network and one registered user on an account.
  • Premiere - Minimal Annual Fee
    iMonnit Premiere allows for enhanced functionality of your wireless sensors and includes an advanced software feature set at a low annual cost. All of iMonnit's advanced features are availble for configuration. You can have more sensors on your account, support multiple users, and view floorplans for all your sensors.

Learn more about the iMonnit Premier Online Software>>

 


Technical Information

Models

Ethernet MNG2-x-EGW-CCE **
Ethernet + POE MNG2-x-EGW-CCE-POE **

Ethernet

Hardware 10/100 Ethernet Controller
IEEE Standard Compliance 802.3-2002
Operation Full- and Half-Duplex
Cross-Over Correction Automatic MDI/MDI-X
Protocols Supported DHCP, DNS, NTP, UDP, TCP, SNMP, Modbus TCP
Cable Connector RJ45
Device Memory Up to 50,000 sensor messages; varies based on sensor type. (Sensor messages will be stored in the
event of Internet outage and transferred when connection is restored)

Power

Input Power 5.0 VDC @ 1A
Ethernet + POE variant 802.3AF Class 1 Compliant

Mechanical

LEDs Connectivity, Server, Network Status

Enclosure

Enclosure ABS
Dimensions 5.004 x 3.8 x 1.51 in.
Weight 7 ounces

Environmental

Operating Temperature -20 to +60°C (-4 to 140°F)
Storage Temperature -40 to +85°C (-40 to 185°F)

Wireless

Transmit Power 25 mW (900 MHz), 17 mW (868 MHz), 6.3 mW (433 MHz)
Antenna Types Connector: RP-SMA
Gain: 2.5 dBi (433 MHz Product)
3.0 dBi (868 MHz, 400 MHz Product)
Wireless Range 1,200+ ft. non-line-of-sight *
Security Encrypt-RF® (256-bit key exchange and AES-128 CTR)
Certifications 900 MHz product; FCC ID: ZTL-G2SC1 and IC: 9794A-G2SC1. 868 and 433 MHz product tested and
found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 60950/62368-1

* Actual range may vary depending on environment.
** x Frequency place holder for global deployments.

Monnit's Ethernet Gateway: Ready in minutes for secure connections 

Monnit’s Ethernet Gateways allow your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply provide power and plug the gateway into an open Ethernet network port with an internet connection. It will then automatically connect with our online servers, providing the perfect solution for commercial locations where there is an active internet connection.


PoE Splitter

If you have a Monnit Ethernet Gateway that doesn’t support Power over Ethernet (PoE), the PoE Splitter allows you to use an existing PoE line to power and communicate with the gateway. The PoE Splitter works by simply separating the power from the data and feeding it to a different input that a non-PoE-enabled device like a gateway can use.


Suggested Application Uses for This Sensor

  • Transmits sensor data to the iMonnit online sensor monitoring portal
  • Commercial monitoring applications
  • Facilities monitoring
  • Small business monitoring
  • Large business monitoring


IMPORTANT 

The Gateway is an integral component as it relays data collected by sensors to the software. For further information, please refer to the tabs above


Customers who bought this item also bought

Monnit Enterprise Humidity Wireless Sensor

Monnit's Enterprise Wireless Humidity Sensor measures the relative humidity (RH) of the air within a room or enclosure.
from $409.00 (ex gst)

Monnit Industrial K-Type Thermocouple Wireless Sensor (up to 400°C/752°F)

Remotely monitor high-temperature applications. Available with a hardwired needle-style probe or quick connector.
from $631.00 (ex gst)

Monnit Industrial Pulse Counter Wireless Sensor

The Monnit Industrial Pulse Counter can be connected to monitor an item’s usage, frequency, or actuations. The collected data can be used to improve service or protect productivity.
$544.00 (ex gst)