Search
Menu Close

Leaf Wetness Smart Sensor Sensor - S-LWA-M003

Manufacturer:
The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating.
Part Number: S-LWA-M003
Back to Previous Page
$230.00 ex GST
i h

The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating. It uses a capacitive grid that is less sensitive to surface residues than resistive grid-based sensors, and comes preconditioned for consistent measurements between sensors and for long-term stability. Along with a 3-meter cable, a mounting bracket is included so the sensor can be easily positioned to mimic the wet-dry characteristics of the plants being studied.

Environment:
The S-LWA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LWA-M003 Sensor supports the following measurements :

Leaf Wetness
Measurement range: 0 (dry) to 100% (wet)
Operating Range: -40°C to 70°C, (-40°F to 158°F)
Repeatablility: ± 5%
Resolution: 0.59%
Stability: < ± 5% per year
Interchangeability between sensors (over the range 10-90%): ± 10%
Measurement Averaging Option: No
Housing: No coating required
Sensor Type: Capacitive Grid
Dimensions:
Sensor plate: 4.7 cm x 5.1 cm (1.8” x 2.0”)
Tube: 12.2 cm length x 1.8 cm diameter (4.8” x 0.7”)
Cable length: 3m (9.8’)
Approximate Weight: 127 g (4.5 oz) for sensor, and 290 g (10.2 oz) with mounting bracket
Mounting Bracket: 20 cm long (8”);Sensor can be positioned at any angle between 0 and 90 degrees (vertical)
Number of Data Channels: 1

For mounting on Onset tripods or masts 3.2 cm to 4.1 cm (1 1/4” to 1 5/8”), Cross Arms (Part # M-CAA or M-CAB), or flat surfaces. U-bolt and tie-wraps included.

*
*
*

The Leaf Wetness Smart Sensor provides accurate leaf wetness data in a number of growing and research applications. The sensor is ready to use and does not require any painting or coating. It uses a capacitive grid that is less sensitive to surface residues than resistive grid-based sensors, and comes preconditioned for consistent measurements between sensors and for long-term stability. Along with a 3-meter cable, a mounting bracket is included so the sensor can be easily positioned to mimic the wet-dry characteristics of the plants being studied.

Environment:
The S-LWA-M003 Sensor is for use in Outdoor environments

Measurements:
The S-LWA-M003 Sensor supports the following measurements :

Leaf Wetness
Customers who bought this item also bought

HOBO MX2301 Temperature/RH Data Logger

The HOBO MX2301 is a weatherproof data logger with built-in temperature and relative humidity sensors. Leveraging Bluetooth Low Energy, the logger enables easy, fast set up and data download directly from your mobile device
$296.00 ex GST

HOBO USB Micro Station Data Logger - H21-USB

HOBO USB Micro Station is a weatherproof data logger for multi-channel monitoring of microclimates and accepts up to five plug-and-play Smart Sensors
$383.00 ex GST

AC Power Adapter for the RX3000 & U30 - AC-U30-EU

AC Power adaptor for HOBO RX3000 and U30 Data loggers
$45.00 ex GST