Search
Menu Close

HOBO UX120-014M - 4-Channel Thermocouple Data Logger

Manufacturer:
The HOBO UX120 Thermocouple Logger is a four-channel LCD data logger for measuring and recording temperature in a range of monitoring applications. The logger makes it easy and convenient to record temperatures over a broad range (-260 to 1820° C) and can accept up to four J, K, T, E, R, S, B, or N type probes.
Part Number: UX120-014M
Back to Previous Page
$733.00 ex GST
i h

Measure temperatures from -260 to 1820⁰ C

A four-channel thermocouple LCD display data logger to measure and record temperature in a broad range of monitoring applications. Records temperatures from -260 to 1820⁰ C and accepts up to four J, K, T, E, R, S, B, or N type probes. This logger also features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities.

Onset also offers a single-channel thermocouple data logger, the HOBO UX100-014M.




Features

  • Easy-to-view LCD display confirms logger operation and battery status
  • Near real-time readout of current temperatures, as well as minimum, maximum, average, and standard deviation statistics
  • On-screen alarms notify you if temperatures exceed high or low thresholds
  • Large memory capacity capable of storing 1.6 million measurements
  • Start, stop, and restart pushbuttons
  • User-upgradeable firmware
  • Optional protective case enables logger use in outdoor environments
  • Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis


Supported Measurements

  • AC Current
  • AC Voltage
  • Amps
  • Kilowatt Hours
  • Power Factor
  • Volt-Amps
  • Volts
  • Watt Hours
  • Watts


Important Information

External sensors sold separately. Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro CD or USB software purchase). See Related Products below.

Monitoring Concrete Curing Temperatures with Data Loggers

Learn the importance of monitoring concrete curing temperatures, and the potential consequences of not doing so.

Technical Information

Thermocouple

Type Range Accuracy Resolution
J -210° to 760°C
(-346° to 1,400°F)
±0.6°C (±1.08°F) ± thermocouple
probe accuracy
0.03°C (0.06°F) 
K -260° to 1,370°C
(-436° to 2,498°F)
±0.7°C (±1.26°F) ± thermocouple
probe accuracy
0.04°C (0.07°F) 
T -260° to 400°C
(-436° to 752°F)
±0.6°C (±1.08°F) ± thermocouple
probe accuracy
0.02°C (0.03°F)
E -260° to 950°C
(-436° to 1,742°F)
±0.6°C (±1.08°F) ± thermocouple
probe accuracy
0.03°C at (0.05°F)
R -50° to 1,550°C
(-58° to 2,822°F)
±2.2°C (±3.96°F) ± thermocouple
probe accuracy
0.08°C (0.15°F) 
S -50° to 1,720°C
(-58° to 3,128°F)
±2.2°C (±3.96°F) ± thermocouple
probe accuracy
0.08°C (0.15°F) 
B 550° to 1,820°C
(1,022° to 3,308°F)
±2.5°C (±4.5°F) ± thermocouple
probe accuracy
0.1°C (0.18F) 
N -260° to 1,300°C
(-436° to 2,372°F)
±1.0°C (±1.8°F) ± thermocouple
probe accuracy
0.06°C (0.11°F)

Internal 10K Thermistor (Temperature)

Range -20° to 70°C (-4° to 158°F)
Accuracy ±0.21°C from 0° to 50°C (±0.38°F from 32° to 122°F), see Plot A of User Manual
resolution 0.024°C at 25°C (0.04°F at 77°F); see Plot A of User Manual
Drift <0.1°C (0.18°F) per year

Logger

Logger Operating Range Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing);
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification
Loggnig Rate 1 second to 18 hours, 12 minutes, 15 seconds
Logging Modes Fixed interval (normal), burst, or statistics
Memory Modes Wrap when full or stop when full
Start Modes Immediate, push button, date & time, or next interval
Stop Modes When memory full, push button, or date & time
Restart Mode Push button
TIme Accuracy ±1 minute per month at 25°C (77°F), see Plot B of User Manual
Power Source Two AAA 1.5 V alkaline batteries, user replaceable, and USB cable
Battery Life 1 year, typical with logging rate of 1 minute and sampling interval of
15 seconds or greater
Memory 4 MB (1.6 million measurements, maximum) 
Download Type USB 2.0 interface
Full Memory Download Time Approximately 1.5 minutes
LCD LCD is visible from 0° to 50°C (32° to 122°F); the LCD may react slowly
or go blank in temperatures outside this range
Size 10.8 x 5.41 x 2.54 cm (4.25 x 2.13 x 1 in.) 
Weight 107.5 g (3.79 oz) 
Environmental Rating IP50
CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).

HOBOware Software

HOBOware software is used for launching, reading out, and plotting data from HOBO® data loggers. With HOBOware, you can also check logger status, filter and export data, save changes to graphs in project files, and scale data with the Linear Scaling and Pulse Scaling data assistants. There are two versions of HOBOware: HOBOware and HOBOware Pro.


HOBOware Standard features

  • Simple menus for fast, easy logger setup and readout
  • Point & click for fast setup and readout
  • Scaling to real-world engineering units
  • Presentation-quality graphs
  • Easy export of data files to text or Excel format

FREE DOWNLOAD


Learn more about HOBOware and HOBOware-Pro Features >>


IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)


Measure temperatures from -260 to 1820⁰ C

A four-channel thermocouple LCD display data logger to measure and record temperature in a broad range of monitoring applications. Records temperatures from -260 to 1820⁰ C and accepts up to four J, K, T, E, R, S, B, or N type probes. This logger also features an internal temperature sensor for logging ambient temperatures, further extending the range of application possibilities.

Onset also offers a single-channel thermocouple data logger, the HOBO UX100-014M.




Features

  • Easy-to-view LCD display confirms logger operation and battery status
  • Near real-time readout of current temperatures, as well as minimum, maximum, average, and standard deviation statistics
  • On-screen alarms notify you if temperatures exceed high or low thresholds
  • Large memory capacity capable of storing 1.6 million measurements
  • Start, stop, and restart pushbuttons
  • User-upgradeable firmware
  • Optional protective case enables logger use in outdoor environments
  • Compatible with HOBOware and HOBOware Pro software for logger setup and graphing & analysis


Supported Measurements

  • AC Current
  • AC Voltage
  • Amps
  • Kilowatt Hours
  • Power Factor
  • Volt-Amps
  • Volts
  • Watt Hours
  • Watts


Important Information

External sensors sold separately. Requires HOBOware software and a USB cable. (Note: A USB-A to USB-B mini cable is included w/HOBOware Pro CD or USB software purchase). See Related Products below.

Customers who bought this item also bought

Siccet PVC Thermocouple Extension Cable

PVC Thermocouple Cable with oval insulation, PVC/PVC Working temperature: -30 + 80°C, max 105°C
$2.50 (ex gst)

HOBO - Type K 6 ft Beaded Thermocouple Sensor

Range: 0 to 480°C. The Type K 6 ft Beaded Thermocouple probe includes 1.8m (6 feet) of insulated 30-AWG wire wound on an integrated spool caddy /sub miniature connector. Color-coded for type K (yellow) thermocouples according to the ANSI standard
$73.00 (ex gst)

Spectherm F11 - Miniature Flat Pin Plug

Thermocouple Connector - Miniture Flat Pin Plug
$3.90 (ex gst)