The New ezeio mkII is a powerful, compact IIoT device with Ethernet and LTE Cat M1 connectivity. Designed for ease of use and versatility, the ezeio is ideal for remotely monitoring and controlling almost any device or installed with OEM equipment.
The ezeio comes standard with analog and digital inputs/outputs, plus Modbus RTU/TCP, SDI-12 and CAN connectivity. There is also alarming via O/P, Email or SMS, remote control and automation functionality via the web based user interface which has Multi-user, multi-site consolidated management and dashboard display functionality.
Introduction of the multipurpose IIoT system from eze System.
- Remote data logger & controller
- Secure management and consolidation through cloud back end
- Analog, Pulse, Modbus RTU/TCP, CAN and SDI-12 compatible
- Monitor, Log, Alarm, Control and Automate - fully remote management
ezeio® mkII Hardware
Combining Hardware & Software making IIoT work.
100% remotely managed, configured & synchronised.
- Input/Output Unit
- Data Logger
- Modem (LTE Cat M1) & Gateway
- PLC (edge processing)
- System Functionality
1 x ezeio mkII Controller
1 x High Gain LTE Antenna
1 x Antenna Bracket suitable for top or side panel mounting.
1 x 1m Ethernet Cable
1 x Built in SIM LTE Cat M1 plan for 12 months
1 x Data and web portal software plan for 12 Months
1 x 12VDC Plug Pack (This is Optional at extra cost, also 24VDC available)
Note: Ongoing fees for the installed SIM LTE Cat M1 and Portal Access Plan apply
ezeio® mkII Cloud Software & User Interface
The ezeio® Cloud is a highly optimised solution for the automated synchronisation of the entire deployed ezeio® Hardware units. It's the core architecture which make the system highly secure, fully redundant and greatly scalable from one user with a single ezeio® to enterprise level deployments with thousands of field devices and users.
The eze.io User Interface is the single hub for all of the users technical and managerial needs.
Any number of ezeio® Hardware units can be accessed by as many users as needed.
- Account Management
- Configuration Management
- Scripting Editor
- Live status
- Alarms & Notifications
- Timers & Schedules
- Mapping & Geofencing
Compatible I/O Expansion Modules
PROMUX is an innovative modular I/O system which provides a simple low cost solution for distributed I/O requirements.
The PROMUX system consists of stand-alone Digital and Analog Input and Output modules which are connected together on a RS485 two wire multi-drop network. The modules communicate using the MODBUS RTU protocol.
A 32bit ARM CPU is used in the modules to provide high speed data processing and fast communications turn around times. Multiple baud rates are selectable from 2400 to 115200 baud.
All PROMUX modules plug directly onto an industry standard DIN rail. All modules have a minimum isolation of 1000VAC rms between the field and logic. The modules have been equipped with status led’s which are used to indicate the status of the Inputs or outputs. This visual indication assists with fault finding and diagnostics.
Power Monitoring Modules
Designed for easy customization for nearly any application or type of equipment, the WattNode Module provides bidirectional energy and power readings via an RS-485 port using Modbus RTU communications.
See the Wattnode Modules here