Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Monnit ALTA Ethernet Wireless Gateway

The MonnitLink Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC
Part Number: MNG2-4-EG-EGW
Call for pricing
Product Files

Product Description

The MonnitLink™ Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the iMonnit online system.

The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.

Product Features

  • AC power supply (POE version also available)
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface
  • FCC, IC and CE certified

What's in the box?

  • Ethernet Gateway
  • High Gain Antenna
  • Power Supply
  • Ethernet Cable
  • Ethernet Gateway Quick Start Guide

Product Description

The MonnitLink™ Ethernet gateway allows your Monnit Wireless Sensors to communicate with the iMonnit™ Online Wireless Sensor Monitoring and Notification System without the need for a PC. Simply plug this device into any open network port with internet connection and it will automatically connect with our online servers. The device will buffer up to 16,000 sensor data messages in on-board memory in the event of an internet connection interruption. When internet communication is re-established the sensor data will download to the iMonnit online system.

The Power-Over-Ethernet option features modified gateway hardware allowing it to be powered through the Ethernet port. Note: This option includes gateway modification only and does not include an Ethernet power injector.

Product Features

  • AC power supply (POE version also available)
  • Existing Internet connection required
  • No PC required for operation
  • Real time TCP interface
  • SNMP poll and trap interface
  • MODBUS TCP interface
  • FCC, IC and CE certified

What's in the box?

  • Ethernet Gateway
  • High Gain Antenna
  • Power Supply
  • Ethernet Cable
  • Ethernet Gateway Quick Start Guide

Ethernet Gateway Specifications

 
Dimension 139.85 x 101.75 x 34.95 mm
 
Storage Temperature: -20 to +85 °C (-4 to 185 °F)
 
Enclosure Material ABS plastic
 
LED Lights H/W status, iMonnit connection status, sensor data activity
 
Antenna Type SMA: 5.0 dBi Gain
 
Operating Temperature -10 to +70 °C (14 to +158 °F)
 
Device Memory 16,000 sensor messages (Sensor messages will be stored in the event of Internet outage and transferred when connection is restored)
 
Hardware 10/100 Ethernet Controller
 
IEEE Standard Compliance 802.3-2002
 
Operation Full- and Half-Duplex
 
Cross-Over Correction Automatic MDI/MDI-X
 
Addressing Pre-programmed MAC Address
 
Host Address t1.sensorsgateway.com
 
Default Port 3000
 
Protocols Supported UDP, DHCP, TCP, SNMP, MODBUS
 
Cable Connector Cat 5
 
Current Requirements, Full Operation 225 mA steady
 
Interface Support Real-Time TCP Interface
SNMP Poll and Trap Interface
MODBUS TCP Interface
 
Power Supply 5.5 V AC adapter 
Power-Over-Ethernet option requires 5.5 V Ethernet power injector (not included)
 
Supports up to 100 sensors per gateway, 1000 gateways per premiere software.

 

  * Actual range may vary depending on environment.

Online store by DBG Technologies, powered by LiveCube