Search
Menu Close

HOBO 10HS Soil Moisture Smart Sensor - Large area of influence

Manufacturer:
Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D. The 10cm probes measure soil moisture over a larger volume of soil which helps to average out any soil variability.
Part Number: S-SMD-M005
Back to Previous Page
$557.00 ex GST
i h

Unlock Greater Accuracy with 10HS Soil Moisture Smart Sensor

Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with soil-specific calibration. The 10cm probes measure soil moisture over a larger volume of soil which helps to average out any soil variability. Readings are provided directly in volumetric water content. This sensor's high frequency design gives it a low sensitivity to salinity and textural effects and a wide measurement range.

Soil moisture smart sensors are used for measuring soil water content and are designed to work with smart sensor-compatible HOBO® stations. They combine the innovative ECH2O® Dielectric Aquameter probe from METER Group with Onset’s smart sensor technology. All sensor conversion parameters are stored inside the smart sensor adapter so data is provided directly in soil moisture units without any programming or extensive user setup.


Features

  • Measures a large 1-liter volume of soil, providing a more accurate picture of average soil moisture
  • Provides data directly in volumetric water content
  • Sensor uses a high-frequency (70 MHz) circuit that provides good accuracy even in high-salinity and sandy soils.
  • Compatible with Onset standalone and web-based weather stations

Technical Information

Measurement Range In soil: 0 to 0.570 m³/m³ (volumetric water content)
Extended range -0.659 to 0.6026 m³/m³; see Note 1
Accuracy ±0.033 m³/m³ (±3.3%) typical 0 to 50°C (32° to 122°F) for mineral soils
up to 10 dS/m and ±0.020 m³/m³ (±2%) with soil specific calibration;
see Notes 2 and 3
Resolution 0.0008 m³/m³ (0.08%)
Volume of Influence 1 liter (33.81 oz)
Sensor Frequency 70 MHz
Soil Probe Dimensions 160 x 32 x 2 mm (6.5 x 1.25 x 0.08 in.)
Weight 190 grams (6.7 oz)
METER ECH2O Probe Part No. 10HS
Sensor Operating Temperature 0° to 50°C (32° to 122°F). Although the sensor probe and cable can
safely operate at below-freezing temperatures (to -40°C/F) and the
smart sensor adapter housing (the portion of the sensor cable that
houses the electronics) can be exposed to temperatures up to 70°C
(158°F), the soil moisture data collected at these extreme
temperatures is outside of the sensor’s accurate measurement range.
Extended temperatures above 50°C (122°F) will decrease logger
battery life.
Bits per Sample 12
Number of Data Channels** 1
Measurement Averaging Option No
Cable Length Available 5 m (16 ft)
Length of Smart Sensor
Network Cable**
0.5 m (1.6 ft)
CE The CE Marking identifies this product as complying with all relevant
directives in the European Union (EU).

* HOBOware® 3.2.1 or greater is required for the S-SMD-M005 model only (if using HOBOware).

** A single smart sensor-compatible HOBO station can accommodate 15 data channels and up to 100 m (328 ft) of smart sensor cable (the digital communications portion of the sensor cables). Note that the S-SMD-M005 smart sensor uses more battery power than other models. Therefore, when connecting this smart sensor to H21-00x loggers that use 4 AA batteries, attach no more than 6 of these sensors to maintain battery life of one year.

Note 1: The sensor is capable of providing readings outside the standard volumetric water content range. This is helpful in diagnosing sensor operation and installation. See the Operation section for more details.

Note 2: This is a system level accuracy specification and is comprised of the probe’s accuracy of ±0.03 m³/m³ typical (±0.02 m³/m³ soil specific) plus the smart sensor adapter accuracy of ±0.003 m³/m³ at 25°C (77°F). There are additional temperature accuracy deviations of ±0.003 m³/m³ / °C maximum for the probe across operating temperature environment, typical <0.001 m³/m³ / °C. (The temperature dependence of the smart sensor adapter is negligible.)

Note 3: Given the nature of the sensor design and sensor operating frequency, the system has inherent susceptibilities to Radio Frequency signals. The accuracy specification when subjected to certain RFI environments, such as those outlined in IEC 61000-4-3 and IEC 61000-4-6, may be significantly reduced. The system level accuracy will be particularly affected when placed in an electric field of 3 V/m or greater in the 150 KHz to 1000 MHz range. RFI mitigation practices and physical deployment changes may reduce the systems susceptibility, however will yield reduced system accuracy. If deployments are planned in high RFI energy environments, Onset recommends on-site testing to determine system level accuracy.

Unlock Greater Accuracy with 10HS Soil Moisture Smart Sensor

Measure soil moisture over a large volume of soil with the affordably-priced 10HS Soil Moisture Smart Sensor. This sensor integrates the field-proven 10HS Sensor and a 12-bit A/D, providing ±3% accuracy in most soils conditions, and ±2% accuracy with soil-specific calibration. The 10cm probes measure soil moisture over a larger volume of soil which helps to average out any soil variability. Readings are provided directly in volumetric water content. This sensor's high frequency design gives it a low sensitivity to salinity and textural effects and a wide measurement range.

Soil moisture smart sensors are used for measuring soil water content and are designed to work with smart sensor-compatible HOBO® stations. They combine the innovative ECH2O® Dielectric Aquameter probe from METER Group with Onset’s smart sensor technology. All sensor conversion parameters are stored inside the smart sensor adapter so data is provided directly in soil moisture units without any programming or extensive user setup.


Features

  • Measures a large 1-liter volume of soil, providing a more accurate picture of average soil moisture
  • Provides data directly in volumetric water content
  • Sensor uses a high-frequency (70 MHz) circuit that provides good accuracy even in high-salinity and sandy soils.
  • Compatible with Onset standalone and web-based weather stations

Customers who bought this item also bought

HOBO 12-Bit Temperature Smart Sensors

The 12-bit Temperature Smart Sensor. Reliable service is assured by a stainless steel sensor tip and robust cable rated for immersion in water up to 50° C for up to 1 year.
from $231.00 (ex gst)

HOBO - Photosynthetic Light (PAR) Smart Sensor

The Photosynthetic Light (PAR) Smart Sensor is intended to measure light intensity for the frequencies relevant for photosynthesis. This sensor has a measurement range of 0 to 2500 umol/m2/sec over wavelengths from 400 to 700 nm.
$586.00 (ex gst)

HOBO - Solar Radiation Shield - Small

Use the RS3-B Solar Radiation Shield with HOBO external sensors for improved temperature measurement accuracy in locations exposed to sunlight
$210.00 (ex gst)