Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Wireless I/O expander for the ezeio Controller

This wireless expansion module adds four general purpose inputs, two outputs and temperature/RH sensing to the ezeio controller. The module communicates wirelessly with the ezeio controller and is very easy to set up
Part Number: 130-0020-0
$563.00 ex GST
[$619.30 inc GST]
Product Files

Easily expand the ezeio Controller with additional inputs and outputs using this wireless expansion module. Each input can be configured for 0-10V, 0-5V, 0-30mA, resistance/switched or pulse. In addition to the four inputs, there are also two relay outputs and an option to add a built-in temperature/RH sensor.

This wireless module is ideal for monitoring free-standing refrigeration units, hard to reach flow sensors or energy meters. An optional integrated Temp/RH sensor can be used to calculate dew point for anti-sweat heat control or air enthalpy for HVAC economizers.

When used in pulse mode, each input has a non-volatile 32-bit counter, and the device will also measure the time between pulses up to 65s with ms resolution.

Features

  • Four general purpose inputs
  • Two relay outputs
  • Built-in temperature and relative humidity sensor (optional)
  • Up to 300ft range
  • Less than 0.2W self draw
  • Easy to mount, connect and configure
  • Up to 9 expanders per ezeio Controller
  • Built in non-resettable pulse count registers
  • External radio link status LED
  • Includes plug pack power supply

Easily expand the ezeio Controller with additional inputs and outputs using this wireless expansion module. Each input can be configured for 0-10V, 0-5V, 0-30mA, resistance/switched or pulse. In addition to the four inputs, there are also two relay outputs and an option to add a built-in temperature/RH sensor.

This wireless module is ideal for monitoring free-standing refrigeration units, hard to reach flow sensors or energy meters. An optional integrated Temp/RH sensor can be used to calculate dew point for anti-sweat heat control or air enthalpy for HVAC economizers.

When used in pulse mode, each input has a non-volatile 32-bit counter, and the device will also measure the time between pulses up to 65s with ms resolution.

Features

  • Four general purpose inputs
  • Two relay outputs
  • Built-in temperature and relative humidity sensor (optional)
  • Up to 300ft range
  • Less than 0.2W self draw
  • Easy to mount, connect and configure
  • Up to 9 expanders per ezeio Controller
  • Built in non-resettable pulse count registers
  • External radio link status LED
  • Includes plug pack power supply
Online store by DBG Technologies, powered by LiveCube