Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Wind Speed Smart Sensor with 3m cable Sensor - S-WSB-M003

Measure wind speed from 0 to 76 m/sec (0 to 170 mph). This smart sensor provides data reporting average wind speed and highest 3 second gust for each logging interval.
Part Number: S-WSB-M003
$555.00 ex GST
[$610.50 inc GST]
Product Files

Measure wind speed from 0 to 76 m/sec (0 to 170  mph). This smart sensor provides data reporting average wind speed and highest 3 second gust for each logging interval. The starting threshold is 1 m/s (2.2 mph); sensor survives 76 m/sec (170 mph). This model comes with a 3m cable.

NOTE: an M-CAA Full Cross Arm or a M-CAB Half Cross Arm is required for mounting.

Environment:
The S-WSA-M003 Sensor is for use in Indoor and Outdoor environments

Measurements:
The S-WSA-M003 Sensor supports the following measurements :

Wind

Measure wind speed from 0 to 76 m/sec (0 to 170  mph). This smart sensor provides data reporting average wind speed and highest 3 second gust for each logging interval. The starting threshold is 1 m/s (2.2 mph); sensor survives 76 m/sec (170 mph). This model comes with a 3m cable.

NOTE: an M-CAA Full Cross Arm or a M-CAB Half Cross Arm is required for mounting.

Environment:
The S-WSA-M003 Sensor is for use in Indoor and Outdoor environments

Measurements:
The S-WSA-M003 Sensor supports the following measurements :

Wind
Measurement parameters: average wind speed and highest 3 second gust in logging interval
Measurement range: 0 to 76 m/sec (0 to 170  mph)  
Operating Temperature Range: -40° to 75°C (-40° to 167°F)
Accuracy: ±1.1m/s (2.4 mph) or ±4% of reading whichever is greater
Resolution: 0.5 m/sec (1.1 mph)
Starting Threshold: 1 m/s (2.2 mph)
Maximum Wind Speed Survival: 76 m/sec (170 mph)
Distance Constant: 3 meters
Housing: 3 cup anemometer with TEFLON® bearings and hardened beryllium shaft
Dimensions: 190 cm x 51 cm (7.5" x 3.2")
Approximate Weight: 300 g (10 oz)
Cable Length: 3 meter (10')
Service Life: greater than 5 year life typical

Note: Cross arm recommended or pole mount (2 hose clamps required for pole mount)

The CE marking identifies this product as complying with all relevant directives in the European Union (EU). To minimize measurement errors due to ambient RF, use the shortest possible probe cable length and keep the probe cable as far as possible from other cables.

Online store by DBG Technologies, powered by LiveCube