Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

UCal 400+ Portable Dri-Block Calibrator

"NEW" The UCal400+ provides a safe, dry and constant temperature source with a Temperature range from 5°C above ambient up to 430°C. Suitable for either on a bench top or as a portable field unit.
Part Number: FDBU400D
$5,790.00 ex GST
[$6,369.00 inc GST]

UCal 400+ Portable Dri-Block Calibrator

  • Wide temperature range
  • Built in program for thermal switch testing
  • Maximum temperature of 430°C/806°F
  • Fast heat up and cool down
  • 10 insert formats available
  • Independent over-temperature protection
  • Only 4kg with included multi-well insert and NIST cert
Note: As there are certian options associated with this product we ask you call us for a quote!

The UCal400+ provides a safe, dry and constant temperature source and can be used either on a bench top or as a portable field unit. The unit covers the temperature range from 5°C above ambient up to 430°C using a machined aluminum insert block as the heat transfer medium. The temperature control circuit is built into the unit. Even though the unit heats up rapidly, highly efficient insulation ensures that the case remains cool enough to handle even at maximum operating temperatures. This calibrator has been designed to comply with all relevant Radio Frequency interference and electrical safety regulations.
 
Cooling Probe
This rapid cooling probe is designed to cool the block on a Tecal 425, 650 or 700X and Ucal 400+.
The water cooled probe will cool a unit down to 10°C if an insert block with a diameter 10mm or 3/8inch bore or larger is used.

Available Inset Block Sizes (call for pricing)

FINSALA aluminium insert 5 x6mm probes 
FINSALB aluminium insert 10/8/6/4.5/3mm probes
FINSALC aluminium insert 2 x6mm and 2x10mm probes
FINSALD aluminium insert 2x6mm and 2x12mm probes
FINSALE aluminium insert 1x6mm probe
FINSALF aluminium insert 5 x ¼” probes
FINSALG aluminium insert 3/8”/ 5/16” /¼”/3/16”/ 1/8” probes
FINSALH aluminium insert 2 x3/8” and 2x¼” probes
FINSALI aluminium insert 2 x½” and 2x¼” probes
FINSALJ aluminium insert 1 x ¼” probe
FINSALK blank aluminium insert
FINSALL aluminium insert 9/16” probe
FINSALM aluminium insert 5/8” probe
FINSALN aluminium insert 11/16” probe
FINSALO aluminium insert 3/4" probe
FINSALP aluminium insert 4/5/9/11mm probes
FINSALQ aluminium insert 6mm probe (immersion depth 40mm)
FINSALR aluminium insert 6mm + 9mm probes
FINSALT aluminium insert 9 x 3.18mm probes
FINSALX aluminium insert 6 x 4mm probes
FINSALZ aluminium insert 20mm probe
FINSALAB aluminium insert 8 x 3.18mm + 1 x 6mm probes
FINSALAC aluminium insert 6.6mm + 19.5mm probes
FINSALAD aluminium insert 2x8mm / 6mm / 9mm probes
FINSALAF aluminium insert 6x3mm probes
FINSALAH aluminium insert 16mm probes
FINSALAL aluminium insert 2x6mm + 3x3.5mm probes
FINSALAM aluminium insert 4x10mm probes

Ordering Information

Product Code

Item Description

Net Weight (kg)

FDBU400D UCal 400+ 230V 4.0
7032718 Carrying case 2.3
FDB00CP Cooling Probe for 425,650,700X, UCAL400+ 0.4

UCal 400+ Portable Dri-Block Calibrator

  • Wide temperature range
  • Built in program for thermal switch testing
  • Maximum temperature of 430°C/806°F
  • Fast heat up and cool down
  • 10 insert formats available
  • Independent over-temperature protection
  • Only 4kg with included multi-well insert and NIST cert
Note: As there are certian options associated with this product we ask you call us for a quote!

The UCal400+ provides a safe, dry and constant temperature source and can be used either on a bench top or as a portable field unit. The unit covers the temperature range from 5°C above ambient up to 430°C using a machined aluminum insert block as the heat transfer medium. The temperature control circuit is built into the unit. Even though the unit heats up rapidly, highly efficient insulation ensures that the case remains cool enough to handle even at maximum operating temperatures. This calibrator has been designed to comply with all relevant Radio Frequency interference and electrical safety regulations.
 
Cooling Probe
This rapid cooling probe is designed to cool the block on a Tecal 425, 650 or 700X and Ucal 400+.
The water cooled probe will cool a unit down to 10°C if an insert block with a diameter 10mm or 3/8inch bore or larger is used.

Available Inset Block Sizes (call for pricing)

FINSALA aluminium insert 5 x6mm probes 
FINSALB aluminium insert 10/8/6/4.5/3mm probes
FINSALC aluminium insert 2 x6mm and 2x10mm probes
FINSALD aluminium insert 2x6mm and 2x12mm probes
FINSALE aluminium insert 1x6mm probe
FINSALF aluminium insert 5 x ¼” probes
FINSALG aluminium insert 3/8”/ 5/16” /¼”/3/16”/ 1/8” probes
FINSALH aluminium insert 2 x3/8” and 2x¼” probes
FINSALI aluminium insert 2 x½” and 2x¼” probes
FINSALJ aluminium insert 1 x ¼” probe
FINSALK blank aluminium insert
FINSALL aluminium insert 9/16” probe
FINSALM aluminium insert 5/8” probe
FINSALN aluminium insert 11/16” probe
FINSALO aluminium insert 3/4" probe
FINSALP aluminium insert 4/5/9/11mm probes
FINSALQ aluminium insert 6mm probe (immersion depth 40mm)
FINSALR aluminium insert 6mm + 9mm probes
FINSALT aluminium insert 9 x 3.18mm probes
FINSALX aluminium insert 6 x 4mm probes
FINSALZ aluminium insert 20mm probe
FINSALAB aluminium insert 8 x 3.18mm + 1 x 6mm probes
FINSALAC aluminium insert 6.6mm + 19.5mm probes
FINSALAD aluminium insert 2x8mm / 6mm / 9mm probes
FINSALAF aluminium insert 6x3mm probes
FINSALAH aluminium insert 16mm probes
FINSALAL aluminium insert 2x6mm + 3x3.5mm probes
FINSALAM aluminium insert 4x10mm probes

Ordering Information

Product Code

Item Description

Net Weight (kg)

FDBU400D UCal 400+ 230V 4.0
7032718 Carrying case 2.3
FDB00CP Cooling Probe for 425,650,700X, UCAL400+ 0.4

Technical Specifications

ParameterUCal 400+
Temperature range 5°C (9°F) above ambient to 430°C (806°F)
Cooling rate 400°C to 100°C, 21 minutes
Heating rate 20°C to 400°C, 12 minutes
Over-temperature cut-out Approximately 450°C
Specification at 200°C +-0.03°C (accuracy +-0.03°C)
Specification at 400°C +-0.05°C (accuracy +-0.05°C)
Well uniformity 0.015°C at 200°C (0.025°C at 400°C)
Display resolution 0.1°
Fan cooling Automatic
Weight 4 kg (9 lbs)
lnsert immersion depth 114mm (4.5in)

Available Inset Block Sizes (call for pricing)

FINSALA aluminium insert 5 x6mm probes 
FINSALB aluminium insert 10/8/6/4.5/3mm probes
FINSALC aluminium insert 2 x6mm and 2x10mm probes
FINSALD aluminium insert 2x6mm and 2x12mm probes
FINSALE aluminium insert 1x6mm probe
FINSALF aluminium insert 5 x ¼” probes
FINSALG aluminium insert 3/8”/ 5/16” /¼”/3/16”/ 1/8” probes
FINSALH aluminium insert 2 x3/8” and 2x¼” probes
FINSALI aluminium insert 2 x½” and 2x¼” probes
FINSALJ aluminium insert 1 x ¼” probe
FINSALK blank aluminium insert
FINSALL aluminium insert 9/16” probe
FINSALM aluminium insert 5/8” probe
FINSALN aluminium insert 11/16” probe
FINSALO aluminium insert 3/4" probe
FINSALP aluminium insert 4/5/9/11mm probes
FINSALQ aluminium insert 6mm probe (immersion depth 40mm)
FINSALR aluminium insert 6mm + 9mm probes
FINSALT aluminium insert 9 x 3.18mm probes
FINSALX aluminium insert 6 x 4mm probes
FINSALZ aluminium insert 20mm probe
FINSALAB aluminium insert 8 x 3.18mm + 1 x 6mm probes
FINSALAC aluminium insert 6.6mm + 19.5mm probes
FINSALAD aluminium insert 2x8mm / 6mm / 9mm probes
FINSALAF aluminium insert 6x3mm probes
FINSALAH aluminium insert 16mm probes
FINSALAL aluminium insert 2x6mm + 3x3.5mm probes
FINSALAM aluminium insert 4x10mm probes
Online store by DBG Technologies, powered by LiveCube