Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Split-Core Bi-Polar DC Transducer - T-VER-971BP-200 - For Loggers

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.
Part Number: T-VER-971BP-200
$640.00 ex GST
[$704.00 inc GST]

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.

Requires analog port selection during RX3000 configuration and use of a S-FS-CVIA when using the H22-001 logger.
When using a U12 logger, UX120-006, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-2).

Note: For measurements larger than 120A the device must be powered by a minimum of 15V to maintain expected accuracy.

  • Measures current flow in both directions which is especially beneficial for Solar PV applications.
  • Adjustable span range
  • Small size, split-core for ease of installation

Environment:
The T-VER-971BP-200 Sensor is for use in Indoor environments

Measurements:
The T-VER-971BP-200 Sensor supports the following measurements :

DC Current

Split-Core Bi-Polar DC Transducer sensor that measures up to 200 Amps of DC current in both flow directions.

Requires analog port selection during RX3000 configuration and use of a S-FS-CVIA when using the H22-001 logger.
When using a U12 logger, UX120-006, this sensor requires a 4-20mA input cable (CABLE-4-20mA) and external power provided by an AC adapter (AC-SENS-2).

Note: For measurements larger than 120A the device must be powered by a minimum of 15V to maintain expected accuracy.

  • Measures current flow in both directions which is especially beneficial for Solar PV applications.
  • Adjustable span range
  • Small size, split-core for ease of installation

Environment:
The T-VER-971BP-200 Sensor is for use in Indoor environments

Measurements:
The T-VER-971BP-200 Sensor supports the following measurements :

DC Current
DC Amperage (bi-polar)
Measurement range: +/- 2 to +/- 200 (via span adjust)
Accuracy (below 100A span): +/- .5 A
Accuracy (above 100A span): +/- .5% full scale
Sensor supply:  12 - 24 DC (15 VDC min. for cuurents > 120 A), 35 mA no-load to 110 mA at 200 A current
Isolation:  600 VAC rms
Operating temperature range:  -30 to 60C (-22 to 140F)
Humidity range:  10 - 90% non-condensing
Response time:  2 sec.
Output:  (bi-polar) 4 - 20mA
Dimensions: 3.1x2.8x1.4 in. (79x70x36 mm)
Weight:  5.25 oz.
Sensor opening:  1.1x.9 in. (28x23 mm)
LED indications:  single green blink=Norm, double green=Over Span, red+green=Over Limit, solid red=overload
CE, UL
Online store by DBG Technologies, powered by LiveCube