Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

SBL & SBS Series Laboratory Fluidised Baths

The SB Fluidised Baths offer a safer alternative to the dangers associated with high temperature oil and salt baths.
Part Number: SBL
Call for pricing

The SB Fluidised Baths offer a safer alternative to the dangers associated with high temperature oil and salt baths.

These units are designed to be bench or floor standing and only require an electrical and air supply for operation. 
Air passes through the mass of the aluminium oxide (Alundum) particles via a porous plate in the base of the unit separating the individual particles and suspending them in free air, giving the properties of a liquid bath. 
Heaters are fitted within the bath which allow temperatures of up to 600°C to be maintained. 
Both the SB range units have a stainless steel inner container insulated from the outer wall and a safety air pressure switch in the event of loss of air and also a thermal cut-out. 

It is highly recommended that the TC-9D temperature control unit is used in conjunction with these baths, thus greatly improving temperature stability and accuracy. 

Ordering Information
Product CodeDescription
F932D SBS-4 230v 5060Hz supplied with 25kg Alundum and overspill flange
F946H SBL-2D 230v 5060Hz supplied with 25kg Alundum and overspill flange

 

The SB Fluidised Baths offer a safer alternative to the dangers associated with high temperature oil and salt baths.

These units are designed to be bench or floor standing and only require an electrical and air supply for operation. 
Air passes through the mass of the aluminium oxide (Alundum) particles via a porous plate in the base of the unit separating the individual particles and suspending them in free air, giving the properties of a liquid bath. 
Heaters are fitted within the bath which allow temperatures of up to 600°C to be maintained. 
Both the SB range units have a stainless steel inner container insulated from the outer wall and a safety air pressure switch in the event of loss of air and also a thermal cut-out. 

It is highly recommended that the TC-9D temperature control unit is used in conjunction with these baths, thus greatly improving temperature stability and accuracy. 

Ordering Information
Product CodeDescription
F932D SBS-4 230v 5060Hz supplied with 25kg Alundum and overspill flange
F946H SBL-2D 230v 5060Hz supplied with 25kg Alundum and overspill flange

 

Technical Specification

SpecificationsSBS-4SBL-2D
Temperature range 50°C: to 500°C 50°C to 600°C
Temperature stability at 50°C ±1°C ±1°C
Heat up time 20°C to maximum 60 minutes 105 minutes
Cool down time maximum to 200°C 180 minutes 200 minutes
Air pressure kPa (psi) 21 (3) 21 (3)
Maximum flow Litresminute 57 57
Nominal heater power at 240V (W) 1500 4000
Weight of medium required 9 Kg 32 Kg
Working volume Diameter x depth (mm) 178 x 140 228 x 350
Overall size Diameter (excluding tap) x H (mm) 335 x 462 385 x 695
Shipping weight 24 kg 59 kg
Online store by DBG Technologies, powered by LiveCube