Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Calex PyroCube G For measuring glass surface temperature

The PyroCube G measures glass surface temperatures from 50°C to 2400°C.
Part Number: PyroCube G
Call for pricing

The new PyroCube G measures glass surface temperatures from 50°C to 2400°C.

Its measurement wavelength of 5 μm provides maximum accuracy when measuring glass. At this wavelength, reflections have the smallest possible effect on the accuracy of the measurement.

A choice of optics is available. Sensors have super-fast response times of 50 ms or 10 ms. 

Features

  • Temperature ranges from 50°C to 2400°C
  • Measured spot as small as 2.2 mm
  • Response time as fast as 10 ms
  • Continuous LED sighting shows the position and size of the measured spot while readings are being taken
  • Multilingual touch screen interface (optional)

Applications

The PyroCube G measures glass surface temperatures from 50°C to 2400°C.

Its measurement wavelength of 5 µm provides maximum accuracy when measuring glass. At this wavelength, reflections have the smallest possible effect on the accuracy of the measurement.

PCU-GH models have a fast response time of 10 ms, making it possible to measure glass gob temperature.

 

The new PyroCube G measures glass surface temperatures from 50°C to 2400°C.

Its measurement wavelength of 5 μm provides maximum accuracy when measuring glass. At this wavelength, reflections have the smallest possible effect on the accuracy of the measurement.

A choice of optics is available. Sensors have super-fast response times of 50 ms or 10 ms. 

Features

  • Temperature ranges from 50°C to 2400°C
  • Measured spot as small as 2.2 mm
  • Response time as fast as 10 ms
  • Continuous LED sighting shows the position and size of the measured spot while readings are being taken
  • Multilingual touch screen interface (optional)

Applications

The PyroCube G measures glass surface temperatures from 50°C to 2400°C.

Its measurement wavelength of 5 µm provides maximum accuracy when measuring glass. At this wavelength, reflections have the smallest possible effect on the accuracy of the measurement.

PCU-GH models have a fast response time of 10 ms, making it possible to measure glass gob temperature.

 

The PyroCube is an infrared pyrometer with an extremely fast response time and a very small measurement area size. It is available with or without the PM030 touch screen interface.

Measurement Specifications

Temperature Range
-G models: 50°C to 1200°C
-GH models: 50°C to 2400°C
Response Time (95%)
-G models: 50 ms
-GH models: 10 ms
Adjustable up to 5 s via averaging function
Measured Spot Diameter
From 2.2 mm depending on measurement distance and choice of optics (see Field of View Diagrams below)
Target Sighting
Red LED built-in as standard on all models, shows the position and size of the measurement area. Switchable on/off.
Accuracy of Measurement
All models: ± 3°C or 1%, whichever is greater
-GH models: ± 2% above 1200°C
Repeatability
-G models: ± 1°C
-GH models: ± 0.2% + 2°C
Temperature Resolution
1°C below 100°C
0.5°C above 100°C
Emissivity Setting
Adjustable, 0.3 to 1.0, via RS232C or optional touch screen interface

PM030 Specifications

Touch Screen Display Format
2.83” (72 mm) resistive touch TFT, 320 x 240 pixels, backlit
Configurable Parameters
Language (English, Chinese, Japanese)
Temperature units °C/°F
Displayed temperature
LED sighting on/off
Password
Date & time (for data logging time stamps)
Peak hold period, decay level
Averaging period
Correction (gain/offset)
Emissivity setting (with teach function)
Reflected energy compensation (with teach function)
Output type
Output temperature range
Polarity on error
Alarm mode, levels, hysteresis

PM030 Data Logging Specifications

Storage
MicroSD Card (optional), max. 32 GB, equal to 16 years of data at the fastest sample rate of 1 per second
Data Logging Interval
1 second to 1 day (configurable)
Internal Clock Battery
1 x BR 1225 3V (not included)
Variables Logged
Instantaneous target temperature, hold temperature, alarm events
File format
.csv
Configurable Parameters (Data Logging)
Sample period
Number of samples
Scheduled start
Configurable Parameters (Alarm Logging)
Log times when triggered, acknowledged, reset
Log data while triggered

Electrical Specifications

Outputs
1 analogue output and 1 alarm output
Analogue Output
4-20 mA (set by default), 0-20 mA, mV/°C or voltage, selectable via optional PM030 touch screen interface
Alarm Output
1 open drain alarm output, rated 27 V DC, 0.2 A
Supply Voltage
5 to 27 V DC, 100 mA max
Digital Communications
RS232C Modbus RTU, non-isolated
Output Cable Connection to Sensor
-G models: Hardwired
-GH models: Connector built into sensor

Field of View

The given measured spot size contains 90% of the energy detected by the sensor. We normally recommend the target is at least twice as large as the given measured spot for maximum accuracy. Accuracy specifications are valid up to the maximum distances shown.

Mechanical Specifications

Weight (without cable)
-G models: 80 g
-GH models: 190 g

Environmental Specifications (PyroCube Sensor)

Environmental Rating IP67
Operating Ambient Temperature 0°C to 50°C
Storage Temperature -15°C to 70°C
Operating Ambient Humidity 30% to 85% RH non-condensing

Display Options

Model PM030 Optional touch screen terminal for indication, configuration, data logging and alarm outputs. Sensor is available with or without display.

PM030 Touch Screen Interface

Provides temperature display, alarm outputs, sensor configuration and data logging for one PyroCube sensor.

 

Panel Mounting Kit

The Panel Mounting Kit (PMK) is an ABS plastic assembly that allows the PM030 touch screen interface to be fitted to a panel.

 

Mounting Bracket

The L-shaped fixed mounting bracket offers a rigid support for the sensor and allows fine rotational adjustment about one axis.

Protective Window

The protective calcium fluoride window helps prevent contamination and damage of the PyroCube sensor’s lens.

Air Purge Collar

Helps keep dust, moisture and contaminants away from the lens. Use clean (instrument) air.

Airless Dust Protector

Helps keep dust away from the lens. No air supply is required.

 

Extension Cable

5 metre long cable for PyroCube sensor, fitted with connectors at both ends.

Right Angled Mirror

Reflects the PyroCube sensor’s field of view by 90 degrees, making it easier to install in tight spaces. Includes a protective calcium fluoride window to keep dust from settling on the mirror and lens.

Water Cooling Jacket

Allows the sensing head to be installed where the ambient temperature is above 50°C. Includes an air purge inlet to stop condensation from forming on the lens. Please note that the sensor’s output cable is rated to 80°C.

PID Controllers

The analogue output of the PyroCube is compatible with any of our indicating controllers for closed-loop PID control.

 

Online store by DBG Technologies, powered by LiveCube