Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Pixsys DRR245 DIN-Rail Mounted Multifunction Indicator / Controller

The new Pixsys DRR245 DIN-rail mounted controller provides a highly versatile alternative to panelmounted instruments and greatly simplifies the measurement and control.
Part Number: DRR245
$380.00 ex GST
$313.00 ex GST
[$344.30 inc GST]
Product Files

Multi-setpoint PID Controller / Signal converter

DIN rail-mounted Controller, single control loop. Distinctive feature is the high configurability available in a single ordering code.

Beside operation as multi-setpoint PID controller, the unit can be ideally used as signal converter thanks to universal analogue input (selectable by parameter for up to 18 different signals) and the analogue output which is galvanically isolated and programmable for rescalable retransmission of process/setpoint value.

RS485-ModbusRTU, Loop Break Alarm by current transformer.

User-friendly interface for the operator, programming tools available for quick set-up (MEMORY-CARD, programming and monitoring software LABSOFTVIEW).

Multi-setpoint PID Controller / Signal converter

DIN rail-mounted Controller, single control loop. Distinctive feature is the high configurability available in a single ordering code.

Beside operation as multi-setpoint PID controller, the unit can be ideally used as signal converter thanks to universal analogue input (selectable by parameter for up to 18 different signals) and the analogue output which is galvanically isolated and programmable for rescalable retransmission of process/setpoint value.

RS485-ModbusRTU, Loop Break Alarm by current transformer.

User-friendly interface for the operator, programming tools available for quick set-up (MEMORY-CARD, programming and monitoring software LABSOFTVIEW).

Ordering codes

DRR245-21ABC-T
1 Analogue input + 2 Relays 5 A + 1Ssr/V/mA + RS485 + TA

Main features

Box
DIN43880, DIN EN50022 rail mounted
Power supply
24...230Vac/dc ±15% 50/60 Hz (galvanic insulation)
Consumption
3 W
Display
4 digits 0,4" green + 4 digits 0,3" red
Operating conditions
Temperature 0-45 °C, humidity 35..95 RU%
Material
Box: Polycarbonate V0; Front panel: Silicon V0
Weight
Approx. 195 g
Sealing
IP65 (Front panel) , IP20 (Box and Terminal blocks)
Quick set-up options
Memory Card with / without battery, software LABSOFTVIEW, EASY-UP codes
Wiring
With terminal extension

Inputs

1 configurable
Selection TC, K, J, S, R, PT100,PT500, PT1000, Ni100, PTC1K, NTC10K (B 3435K), 0/4..20 mA, 0..10 V,0...40mV, Potentiometer 1...6/160 Kohm, T.A (1024 points)
Sampling time
Programmable up to 4,1 ms (Frequency up to 242 Hz)
1 T.A. input
Selection T.A. 50 mA - 100 msec - 1024 points
1 Digital input
1/2...4 setpoints selection , Hold, Run, Tuning launch, Start/stop cycle

Outputs

2 Relays
Relays 5 A - 250 Vac resistive charge
1 SSR
12 Vdc - 30 mA max
1 Analogue
Selection 4 - 20 mA or 0 - 10 Vdc for command or retransmission PV/SPV
Serial communication
RS485 Modbus RTU - Slave

Software features

Control algorithms
ON - OFF with hysteresis, P., P.I., P.I.D., P.D. time proportioned
Tuning
Manual or automatic
Data protection
Lock Command / alarm setpoint
Alarm mode
Absolute / Threshold, band, High / Low deviation. Loop Break Alarm function
Auto/Man function
Output percentage command also with automatic change in case of sensor failure
Double P.I.D.
Heating / Cooling P.I.D.
Programmer function
Start/Stop pre-programmed cycle with 2/3 steps
Soft-Start
Rising gradient expressed as Degrees / Hour
Online store by DBG Technologies, powered by LiveCube