Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

LPI-B - 2 Wire Bridge Transmitter - Intech

Isolating Bridge Input to 4~20mA Output Loop Powered Transmitter.
Part Number: LPI-B
*
$427.00 ex GST
[$469.70 inc GST]

Features:

  • Field Programmable Bi-Polar Input Ranges.
  • Isolated Input to Output 2.0kVDC.
  • High Accuracy.
  • 40~200mV Output Test Signal.
  • LED Indication of Loop Current.
  • Selectable 3 Second Input Damping.
  • Low Cost.
  • Easy to Install.
  • Compact DIN Rail Mount Enclosure.
  • Available Standard or Special Calibration.
  • Reverse Polarity Protection.

Ordering Information:

LPI-B ordering table

Features:

  • Field Programmable Bi-Polar Input Ranges.
  • Isolated Input to Output 2.0kVDC.
  • High Accuracy.
  • 40~200mV Output Test Signal.
  • LED Indication of Loop Current.
  • Selectable 3 Second Input Damping.
  • Low Cost.
  • Easy to Install.
  • Compact DIN Rail Mount Enclosure.
  • Available Standard or Special Calibration.
  • Reverse Polarity Protection.

Ordering Information:

LPI-B ordering table

LPI-B Specifications.

  • Input -mV Field Programmable: 1~1000mVdc and Bipolar.
    • Minimum Input Resistance = 1M
    • Maximum Over-range = 30Vdc Continuous.
    • 3 Second Input Damping Selectable With S3-1.
  • Output -mA 2 wire 4~20mA. (Loop Powered.)
    • -mV Test 40~200mV ±1% @ 4~20mA. Other Test Voltages Available. e.g. 1~5V.
    • Note. mV Test Increases Power Supply & Decreases Load Resistance.
  • Power Supply 8~33Vdc.
  • Supply Voltage Sensitivity <±0.005%/V FSO.
  • Output Load Resistance 800 @ 24Vdc. (50/V Above 8Vdc.)
  • Maximum Output Current Limited to <28mA.
  • Accurate to <±0.1% FSO Typical.
  • Linearity & Repeatability <±0.1% FSO Typical.
  • Ambient Drift <±0.02%/C FSO Typical.
  • Noise Immunity 125dB CMRR Average. (2.0kVac RMS Limit.)
  • EMC Compliances Emissions EN 55022-A. Immunity EN 50082-1, <1% Effect FSO Typical.
  • Isolation Test Voltages 2000Vac/dc Input to Output for 1min.
  • Response Time 200msec Typical. (10 to 90% 50msec Typical.)
  • Operating Temperature 0~70C.
  • Storage Temperature -20~80C.
  • Operating Humidity 5~85%RH Max. Non-Condensing.
  • Dimensions and Construction L=79, W=22.5, H=85mm. Polyamide Thermoplastic Rail Mount Enclosure

LPI-B ordering table

Online store by DBG Technologies, powered by LiveCube