Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Liquid Calibration Baths

The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid baths which can be used for external circulation or temperature calibration of thermal sensors.
Part Number: Liquid Calibration Baths
Call for pricing
The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid baths which can be used for external circulation or temperature calibration of thermal sensors.

• –35°C to 250°C
• Three different capacities available; 5, 7 or 12 litres
• Temperature stability; ±0.005°C depending on choice of control unit
• Fully insulated bath for excellent heat retention
• Analogue or digital temperature selection, depending on choice of control unit
• Includes cover, lid and bridging plate

When temperature calibration is required the compact liquid baths offer excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.

All models of LCB offer high pump performance and exceptional thermal stability from –35°C to 250°C. The baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient. 
The minimum temperature achievable is –35°C when a Dip or Flow Cooler is added to the system.* (See below)

Each bath is supplied complete with lid, drain tap, carry handles, a cooling coil (with bung) and hole to position a certified sensor. The TechneWorks software package is available for the TU-20 thermoregulators free of charge from www.techne.com

LCB Probe holder
The new FBCAL7PH LCB probe holder is an accessory designed to allow multiple probe positioning and calibration within the LCB. 
It can be used for 5, 7 and 12 litre baths and acts as a lid as well as a probe holder.
The Probe holder has spare mounting studs to suit all 3 bath models.

The probe holder has holes for 10 off probes to Ø12.5mm and also 8 off probes to Ø6.5mm. 
 
Ordering Information

Product Code Description
FBCAL05D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 5 litre capacity
FBCAL07D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 7 litre capacity
FBCAL12D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 12 litre capacity
FBCAL7PH LCB Probe Holder
The Techne® liquid calibration bath (LCB) series offer compact, accurate and reliable liquid baths which can be used for external circulation or temperature calibration of thermal sensors.

• –35°C to 250°C
• Three different capacities available; 5, 7 or 12 litres
• Temperature stability; ±0.005°C depending on choice of control unit
• Fully insulated bath for excellent heat retention
• Analogue or digital temperature selection, depending on choice of control unit
• Includes cover, lid and bridging plate

When temperature calibration is required the compact liquid baths offer excellent stability over the entire temperature range. The LCBs can be also be used for external circulation to maintain temperatures of samples in viscometers, photometers, refractometers, fermenters and other reaction vessels.

All models of LCB offer high pump performance and exceptional thermal stability from –35°C to 250°C. The baths are fully insulated on all sides and base and are fitted with a cooling coil for connection to a cold water supply for use at temperatures around ambient. 
The minimum temperature achievable is –35°C when a Dip or Flow Cooler is added to the system.* (See below)

Each bath is supplied complete with lid, drain tap, carry handles, a cooling coil (with bung) and hole to position a certified sensor. The TechneWorks software package is available for the TU-20 thermoregulators free of charge from www.techne.com

LCB Probe holder
The new FBCAL7PH LCB probe holder is an accessory designed to allow multiple probe positioning and calibration within the LCB. 
It can be used for 5, 7 and 12 litre baths and acts as a lid as well as a probe holder.
The Probe holder has spare mounting studs to suit all 3 bath models.

The probe holder has holes for 10 off probes to Ø12.5mm and also 8 off probes to Ø6.5mm. 
 
Ordering Information

Product Code Description
FBCAL05D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 5 litre capacity
FBCAL07D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 7 litre capacity
FBCAL12D LCB insulated liquid calibration bath with cooling coil, Lid and Drain, 12 litre capacity
FBCAL7PH LCB Probe Holder
Technical Specification

Parameter 5 litre 7 litre 12 litre
Dimensions L x W x H (mm) 351 x 260 x 183 351 x 260 x 233 351 x 260 x 358
Bath opening (mm) 140 x 140 140 x 140 140 x 140
Working depth (mm) 125 175 300
Shipping Weight 5kg 9kg 9kg

* LCB baths fitted with a TU-20HT thermoregulator are not suitable for use with a flow cooler (See below)

Liquid Calibration Bath LCB–5,LCB–7,LCB–12 LCB–5, LCB–7, LCB–12
Thermoregulator TU–20D TU–20HT
Bath Capacity 5 or 7 or 12 litres 5 or 7 or 12 litres
Operating temperature range 1 –35°C to +200°C ambient +10°C to +250°C
Working temperature range 2 25°C to +200°C 30°C to +200°C
Stability at �35°C (short term*) ±0.015°C Not applicable
Stability at 0°C (short term*) ±0.020°C Not applicable
Stability at 50°C (short term*) ±0.005°C ±0.005°C
Stability at 100°C (short term*) ±0.015°C ±0.015°C
Stability at 200°C (short term*) ±0.024°C ±0.024°C
Stability at 250°C (short term*) Not applicable ±0.040°C
Uniformity °C (full range **) 0.008 0.008
Accuracy °C (full range) ±0.5 ±0.5
Online store by DBG Technologies, powered by LiveCube