Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Intech XU4 (Powered) USB Programmable - Universal Input and Output

The XU Series of USB Programmable Universal Input Transmitters with easy to use setup software. They have a Universal Input and Output and can be powered by AC or DC voltages.
Part Number: XU4
*
$276.00 ex GST
[$303.60 inc GST]
Product Files

Features:

  • Programmable via USB (requires the XU-USB programming key).
  • No power supply or calibration required during programming.
  • Input Types:
    • RTD Pt100 and Pt1000.
    • Thermocouple B, E, J, K, N, R, S, T.
    • For RTD and Thermocouple; Output is Linear with Temperature.
    • mA, mV and V.
    • Potentiometer.
    • 32 point curve fitter for mA, mV, V inputs.
  • Input to Output Isolation 3750Vac.
  • High Accuracy 0.1%.
  • Universal AC/DC Power Supply; 20~265Vac or 21~100Vdc.
  • Reverse Polarity Protection.
  • Heartbeat Status LED.
  • Case Temperature range -20°C to +80°C.
  • Compact DIN Rail Mount Enclosure.
  • Easy to Install.
  • Low Cost.


Note: Requires the XU-USB programming key, or OneTemp can calibrate to your requirements before dispatch.

Click here to Download FREE Programming Software

Features:

  • Programmable via USB (requires the XU-USB programming key).
  • No power supply or calibration required during programming.
  • Input Types:
    • RTD Pt100 and Pt1000.
    • Thermocouple B, E, J, K, N, R, S, T.
    • For RTD and Thermocouple; Output is Linear with Temperature.
    • mA, mV and V.
    • Potentiometer.
    • 32 point curve fitter for mA, mV, V inputs.
  • Input to Output Isolation 3750Vac.
  • High Accuracy 0.1%.
  • Universal AC/DC Power Supply; 20~265Vac or 21~100Vdc.
  • Reverse Polarity Protection.
  • Heartbeat Status LED.
  • Case Temperature range -20°C to +80°C.
  • Compact DIN Rail Mount Enclosure.
  • Easy to Install.
  • Low Cost.


Note: Requires the XU-USB programming key, or OneTemp can calibrate to your requirements before dispatch.

Click here to Download FREE Programming Software

Intech Instruments XU process transmitters

Process transmitter which can be programmed using a software program and special usb cable. The transmitter does not need to be powered or require any calibration after completion

  • Output 4 wire
    • Voltage Field Programmable from 0V~10V, 10V~0V, +10V to (-10V), -10V to +10V Maximum Output Drive = 10.4Vdc. (520Ω@20mA.)
    • Current Field Programmable from 4~20mA, 0~20mA, 20~4mA & 20~0mA Maximum Output Drive = 20mA (650Ω maximum load @13Vdc.)
  • Universal P/S: 20~265Vac and 21~265Vdc
    • Circuit Sensitivity <±0.001%/V FSO Typical.
  • EMC Emissions Compliance EN 61326
  • EMC Immunity Compliance EN 61326
  • Safety Compliance EN 61010-1
  • Accurate to <±0.03% FSO Typical.
  • Linearity & Repeatability <±0.02% FSO Typical. (Unless Individual Specifications State Otherwise.)
  • Ambient Drift <±0.003%/C FSO Typical.
  • Noise Immunity 125dB CMRR Average. (2.0kVdc Limit.)
  • R.F Immunity <1% Effect FSO Typical.
  • Signal Isolation Voltage Between Input and Output 3750Vac for 1 min.
  • Response Time 400msec Typical. (From 10 to 90% 300msec Typical)
  • Output calibrate via Pot ±0.5mA Zero offset adjust
  • Error Detection LED indication for sensor errors.
  • Operating Temperature -20~85°C.
  • Storage Temperature -20~100°C.
  • Operating Humidity 5~85%RH Max. Non-Condensing.
  • Mounting 35mm Symmetrical Mounting Rail.
  • Dimensions H=79, W=30, D=68mm.
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Online store by DBG Technologies, powered by LiveCube