Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

Intech XU2 (Loop Powered) USB Programmable - Universal Input, 4-20mA Output

Intech XU2, DIN Rail Mount, USB Programmable, Universal Input Transmitters with easy to use setup software. A universal input with a large selection of input types and a Loop Powered 4-20mA Output.
Part Number: XU2
*
$222.00 ex GST
[$244.20 inc GST]
Product Files

Features:

  • Programmable via USB (requires the XU-USB programming key).
  • No power supply or calibration required during programming.
  • Zero trim pot for in field calibration
  • Input Types:
    • RTD Pt100 and Pt1000.
    • Thermocouple B, E, J, K, L, N, R, S, T.
    • mA, mV and V.
    • Potentiometer.
    • 32 point curve fitter for mA, mV, V inputs.
  • Input to Output Isolation 3750Vac.
  • High Accuracy 0.1%.
  • Reverse Polarity Protection.
  • Heartbeat Status LED.
  • Case Temperature range -20°C to +80°C.
  • Compact DIN Rail Mount Enclosure.
  • Easy to Install.
  • Low Cost.

Note: Requires the XU-USB programming key, or OneTemp can calibrate to your requirements before dispatch.

Click here to Download FREE Programming Software

Features:

  • Programmable via USB (requires the XU-USB programming key).
  • No power supply or calibration required during programming.
  • Zero trim pot for in field calibration
  • Input Types:
    • RTD Pt100 and Pt1000.
    • Thermocouple B, E, J, K, L, N, R, S, T.
    • mA, mV and V.
    • Potentiometer.
    • 32 point curve fitter for mA, mV, V inputs.
  • Input to Output Isolation 3750Vac.
  • High Accuracy 0.1%.
  • Reverse Polarity Protection.
  • Heartbeat Status LED.
  • Case Temperature range -20°C to +80°C.
  • Compact DIN Rail Mount Enclosure.
  • Easy to Install.
  • Low Cost.

Note: Requires the XU-USB programming key, or OneTemp can calibrate to your requirements before dispatch.

Click here to Download FREE Programming Software

Intech Instruments XU process transmitters

Process transmitter which can be programmed using a software program and special usb cable. The transmitter does not need to be powered or require any calibration after completion

  • Output 2 wire 4~20mA / or 20~4mA - Loop Powered.
  • Power Supply 9.5~36Vdc.
  • Supply Voltage Sensitivity <±0.005%/V FSO.
  • Output Load Resistance 700Ω @ 24Vdc. (50Ω/V Above 9.5Vdc.)
  • Maximum Output Current Limited to <28mA.
  • EMC Emissions Compliance EN 61326
  • EMC Immunity Compliance EN 61326
  • Safety Compliance EN 61010-1
  • Accurate to <±0.03% FSO Typical.
  • Linearity & Repeatability <±0.02% FSO Typical. (Unless Individual Specifications State Otherwise)
  • Ambient Drift <±0.003%/C FSO Typical.
  • Noise Immunity 125dB CMRR Average. (2.0k Vdc Limit.)
  • R.F. Immunity <1% Effect FSO Typical.
  • Signal Isolation Voltage Between Input and Output 3750Vac for 1 min. (Excluding XU2HN)
  • Response Time 400msec Typical. (From 10 to 90% 300msec Typical.)
  • Sensor Fail Low 3.8mA, High 21mA
  • Startup Time 3 seconds, 3.7mA output
  • Output calibrate via Pot ±0.5mA Zero offset adjust. (Excluding XU2HN)
  • Operating Temperature -20~85°C (XU2HN: -20~55°C)
  • Storage Temperature -20~100°C
  • Operating Humidity 5~85%RH Max. Non-Condensing.
  • Mounting 35mm Symmetrical Mounting Rail. In Head mount for XU2HI & XU2HN
  • Dimensions XU2: H=79, W=20, D=68mm. / XU2HI & XU2HN: H=44, W=44, D=23mm.
Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent
Online store by DBG Technologies, powered by LiveCube