Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

IMR 1400-IR Industrial Gas Analyser

An industrial Gas Analyser for for Boiler, Burner, Engine analysis
Part Number: IMR-1400-IR
Call for pricing

IMR 1400-IR

MEASURES CO2 with NDIR Technology
This latest model does not only measure the most common parameters but also CO2 !!
  • Measures flue-gases of boilers, burners, engines,..
  • Developped to meet the customers need
  • High quality combustion gas analyzer using the latest sensor technology
  • Easy to use and it measures all important parameters
  • Includes all needed features for a complete analysis
STANDARD FEATURES
Illuminated display with simultaneous display of 8 measured variables Printout of all measured and calculated parameters Gas sampling probe, length 10.5" (270mm),NiCrNi, flexible hose 11.5 ft. (3,5m)
Languages: D, UK, F, USA, E, TR, etc. Electronic controlled soot measurement  Combustion air probe, length 5" (130mm), line 11.5 ft. (3,5m)
7 programmed and 5 programmable fuels Automatic and manual CO overflow shut-off Condensation trap with integrated filter
Measurement display is switchable between ppm, mg, mg(O2) and mg/kwh Automatic zero calibration within 3 minutes. Recalibration within 30 sec. Operating temperature 50°F..104°F (10°C..40°C)
Battery status is shown on the measurement display Integrated self check program for all functions and parameters. Storing temperature -4°F..122°F (-20°C..50°C)
Interface RS 232 After 1000 operating hours a "Service needed" note appears on the display. Power supply  230V/50Hz, 110V/60Hz, 12VDC

IMR 1400-IR

MEASURES CO2 with NDIR Technology
This latest model does not only measure the most common parameters but also CO2 !!
  • Measures flue-gases of boilers, burners, engines,..
  • Developped to meet the customers need
  • High quality combustion gas analyzer using the latest sensor technology
  • Easy to use and it measures all important parameters
  • Includes all needed features for a complete analysis
STANDARD FEATURES
Illuminated display with simultaneous display of 8 measured variables Printout of all measured and calculated parameters Gas sampling probe, length 10.5" (270mm),NiCrNi, flexible hose 11.5 ft. (3,5m)
Languages: D, UK, F, USA, E, TR, etc. Electronic controlled soot measurement  Combustion air probe, length 5" (130mm), line 11.5 ft. (3,5m)
7 programmed and 5 programmable fuels Automatic and manual CO overflow shut-off Condensation trap with integrated filter
Measurement display is switchable between ppm, mg, mg(O2) and mg/kwh Automatic zero calibration within 3 minutes. Recalibration within 30 sec. Operating temperature 50°F..104°F (10°C..40°C)
Battery status is shown on the measurement display Integrated self check program for all functions and parameters. Storing temperature -4°F..122°F (-20°C..50°C)
Interface RS 232 After 1000 operating hours a "Service needed" note appears on the display. Power supply  230V/50Hz, 110V/60Hz, 12VDC

TECHNICAL DATA

PARAMETER  PRINCIPLE RESOLUTION ACCURACY RANGE  1400 - IR
O2 Oxygen Electro-chemical 0.1 Vol.% ± 0.2 % 0-20.9Vol. %
ü
CO2 Carbon dioxide NDIR 0.01 Vol.% 5 %  0-30.00Vol. %
ü
CO Carbon monoxide Electro-chemical 1 ppm 5 %  0-2,000 ppm
ü
COp Carbon monoxide-corrected Calculation 1 ppm 5 %    ü
NO Nitric oxide Electro-chemical 1 ppm 5 % 0-2,000 ppm
NO2 Nitric dioxide Electro-chemical 1 ppm 5 % 0- 100 ppm  
SO2 Sulfur dioxide Electro-chemical 1 ppm 5 % 0-4,000 ppm
HC Hydrocarbon Solid state  0.1%  5 % 0-100% LEL  
TG Gas temperature NiCr-Ni thermocouple 1 K ± 2 % -4°F..2192°F 
-20°C..1200°C
ü
TA Air temperature Semiconductor 1 K ± 0.5 K 4°F..248°F 
-20°C..120°C
ü
P Draft Solid state 0.004" H2O 
0.01 hPa
± 2 % -12"H2O/+20"H2O 
-30hPa/+50hPa
ü
Combustion Efficiency / ETA Calculation 1 % ± 0.5 % 0-99,9 %
ü
Losses / qA  Calculation 1 % ± 0.5 % 0-99,9 %
ü
Excess air / LAMBDA Calculation 1 % ± 2 % 1,0-9,99
ü
Soot Filter paper      
ü

Other ranges are available upon request. Max. 4 sensors are possible
Standard: O2-CO-CO2 and one more sensor is optional available (NO or NO2 or SO2 or HC)


SPECIFICATION
Dimensions wxdxh: 16"(425mm) x 7"(185mm) x 11"(290mm)
Weight: approx. 15lbs. (5.8kg)
MODEL PART-NO.
IMR 1400 IR       O2, CO, CO2 14296
Online store by DBG Technologies, powered by LiveCube