Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

HOBO UX90 State Logger - UX90-001

The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow.
Part Number: UX90-001 & UX90-001M
*
$161.00 ex GST
[$177.10 inc GST]

The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.

  • One logger with 4 recording modes
  • Internal reed switch can be used to determine when a door or window is open or closed
  • Compatible with a wide range of external sensors
  • Ships with 2.5 mm input cable (CABLE-2.5-STEREO)

Environment:
The UX90-001 Data Logger is for use in Indoor environments

Measurements:
The UX90-001 Data Logger supports the following measurements :

Event, Kilowatt Hours (kWh), Motor On/Off, Pulse Input, Runtime, State Open/Closed, Water Flow
 

 
What is the difference between the HOBO Event data logger and the HOBO State data logger?

The HOBO Event data logger records the opening of the contacts only. It does not record the closing. The HOBO State data logger records changes in the state - both the opening and closing of the switch, (door open/close, light on/off, etc).

IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. See compatible items below and the "software" tab above.
 

The HOBO State/Pulse/Event/Runtime data logger records state changes,electronic pulses and mechanical or electrical contact closures from external sensing devices. This logger is ideal for monitoring energy consumption, mechanical equipment operation, and water and gas flow. The HOBO UX90-001 State Logger is available in a standard 128 KB memory model (UX90-001) capable of 84,650 measurements and an expanded 512KB memory version (UX90-001M) capable of over 346,795 measurements.

  • One logger with 4 recording modes
  • Internal reed switch can be used to determine when a door or window is open or closed
  • Compatible with a wide range of external sensors
  • Ships with 2.5 mm input cable (CABLE-2.5-STEREO)

Environment:
The UX90-001 Data Logger is for use in Indoor environments

Measurements:
The UX90-001 Data Logger supports the following measurements :

Event, Kilowatt Hours (kWh), Motor On/Off, Pulse Input, Runtime, State Open/Closed, Water Flow
 

 
What is the difference between the HOBO Event data logger and the HOBO State data logger?

The HOBO Event data logger records the opening of the contacts only. It does not record the closing. The HOBO State data logger records changes in the state - both the opening and closing of the switch, (door open/close, light on/off, etc).

IMPORTANT: This HOBO data logger requires HOBOware software and a communications device. See compatible items below and the "software" tab above.
 

Next-Generation Time-of-Use Loggers for Fast, Reliable Monitoring

Learn how HOBO UX90 loggers make it fast and easy to monitor equipment runtimes, room occupancy patterns, light usage, and more!



HOBO State Data Logger UX90-001

Learn the features of this state logger, including four distinct recording modes: states, pulses, run times, and events. Hooking this product up to a WattNode kWh hour transducer is discussed. Output display, battery details, USB, downloading data with HOBOware Pro software, and use with data shuttle is also covered.

Internal Sensor


Maximum State, Event, Runtime Frequency: 1 Hz

Preferred Switch State: No magnet present (normally open)

External Input


External Contact Input: Electronic solid state switch closure or logic driven voltage output 

Range: 0 to 3 V DC (USB powered), 0 to 2.5 V DC (battery powered)

Maximum Pulse Frequency: 50 Hz

Maximum State, Event, Runtime Frequency: 1 Hz

Pulse, Event Lockout Time: 0 to 1 second in 100 ms steps

Solid State Switch Closure: Input Low: < 10 KΩ; Input High: > 500 KΩ

Internal Weak Pull-Up: 100 KΩ

Input Impedance: Solid state switch closure: 100 KΩ pull up

Logger


Resolution: Pulse: 1 pulse, Runtime: 1 second, State and Event: 1 State or Event

Logging Rate: 1 second to 18 hours, 12 minutes, 15 seconds

UX90-001- - Time and Accuracy Specification ChartTime Accuracy: ±1 minute per month at 25°C (77°F) (see Plot A)

Battery Life: 1 year, typical with logging intervals greater than 1 minute and normally open contacts 

Memory
UX90-001: 128 KB (84,650 measurements, maximum)
UX90-001M: 512 KB (346,795 measurements, maximum)

Download Type: USB 2.0 interface

Download Time: 10 seconds for 128 KB; 30 seconds for 512 KB

Logger Operating Range
Logging: -20° to 70°C (-4° to 158°F); 0 to 95% RH (non-condensing)
Launch/Readout: 0° to 50°C (32° to 122°F) per USB specification

LCD: LCD is visible from: 0° to 50°C (32° to 122°F); the LCD may react slowly or go blank in temperatures outside this range

Size: 3.66 x 5.94 x 1.52 cm (1.44 x 2.34 x 0.6 in.)

Weight: 23 g (0.81 oz)

Environmental Rating: IP50

Description: ce - The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)

HOBOware Software

IMPORTANT: This HOBO data logger requires HOBOware software and a communications cable (see related products below)
HOBOware Software is a FREE download


or Learn more about HOBOware and HOBOware-Pro features

 

Note: This logger also operates with the advanced HOBOware-Pro Software

 


 

Online store by DBG Technologies, powered by LiveCube