Search
Menu Close

CS Instruments DS 400 Set - Stationary dew point measurement in compressed air systems

Manufacturer:
The DS 400 is used for stationary dew point monitoring of refrigeration and adsorption dryers. Touch screen graphics, relay and 4-20mA outputs.
Part Number: DS400
Back to Previous Page
Call for pricing

DS 400 Set - Stationary dew point measurement in compressed air systems

For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values. 2 alarm relays are available for monitoring of threshold values. Available either with a classic analogue output 4...20 mA or optionally with digital interfaces like Ethernet and RS 485 (Modbus protocol). As a stand-alone solution the measured data stored in the optional data logger can be read-out via USB stick and evaluated by means of the software CS Soft Basic.


Special Features of dew point measurement DS 400-Set

  • 3.5" graphic display - easy operation with touch screen
  • System ready for plug-in: Everything completely wired
  • 2 alarm contacts (230 VAC, 3 A) pre- and main alarm freely adjustable
  • An alarm delay can be set for each alarm relay
  • 4...20 mA analogue output
  • Option: Ethernet and RS 485 interface (Modbus protocol)
  • Option: Webserver


Option: Integrated data logger

  • Recording of the dew point progression of up to 100 million measuring values
  • CS Soft Basic for evaluation in graphic and table form. Read-out of the data either via USB stick or via Ethernet

Technical Information

Dimensions: 118 x 115 x 98 mm
IP 54 (wall housing)
92 x 92 x 75 mm
(panel mounting)
Inputs: 2 digital inputs for FA 510 or VA
500/520
Interface: USB interface
Power supply: 100…240 VAC, 50-60 Hz
Accuracy: See FA 510
Alarm outputs: 2 relays, (pot.-free)

Options:

Data logger: 100 million measured
values start/stop time,
measuring rate freely
adjustable
2 additional sensor
inputs:
For connection of pressure
sensors, temperature
sensors, clamp-on
ammeters, third-party
sensors with 4...20 mA,
0 to 10 V, Pt 100, Pt
1000

How to implement a complete compressed air monitoring system within an industrial environment?


DS 400 Set - Stationary dew point measurement in compressed air systems

For stationary dew point monitoring of refrigeration or adsorption dryers. The touch screen graphic display enables an intuitive operation and shows the progress of the measured values. 2 alarm relays are available for monitoring of threshold values. Available either with a classic analogue output 4...20 mA or optionally with digital interfaces like Ethernet and RS 485 (Modbus protocol). As a stand-alone solution the measured data stored in the optional data logger can be read-out via USB stick and evaluated by means of the software CS Soft Basic.


Special Features of dew point measurement DS 400-Set

  • 3.5" graphic display - easy operation with touch screen
  • System ready for plug-in: Everything completely wired
  • 2 alarm contacts (230 VAC, 3 A) pre- and main alarm freely adjustable
  • An alarm delay can be set for each alarm relay
  • 4...20 mA analogue output
  • Option: Ethernet and RS 485 interface (Modbus protocol)
  • Option: Webserver


Option: Integrated data logger

  • Recording of the dew point progression of up to 100 million measuring values
  • CS Soft Basic for evaluation in graphic and table form. Read-out of the data either via USB stick or via Ethernet