Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

CH-5 Chiller with Pump unit

The CH-5/PC-5 Chiller/Pump Unit is designed for use in conjunction with the TECAL 140 H & S Calibrators to achieve calibration temperatures down to -40°C.
Part Number: CH-5
Call for pricing

CH-5 Chiller with Pump unit

The CH-5/PC-5 Chiller/Pump Unit is designed for use in conjunction with the TECAL 140 H & S Calibrators to achieve calibration temperatures down to -40°C. 
This unit provides a chilled water supply which is pumped through the Heatsinks on the Tecal 140 H & S units allowing the Tecal to reach -40°C.

The unit is designed to run on distilled or deionised water.

The CH-5/PC-5 can also be used to pass chilled water through the cooling coil on the Liquid Calibration Baths (LCB) and Cooling Probe (FDB00CP) giving rapid cooling or a minimum temperature of +10°C.
 
Ordering Information

Product CodeDescription
FCH5H CH-5PC-5 230v 50Hz
   

CH-5 Chiller with Pump unit

The CH-5/PC-5 Chiller/Pump Unit is designed for use in conjunction with the TECAL 140 H & S Calibrators to achieve calibration temperatures down to -40°C. 
This unit provides a chilled water supply which is pumped through the Heatsinks on the Tecal 140 H & S units allowing the Tecal to reach -40°C.

The unit is designed to run on distilled or deionised water.

The CH-5/PC-5 can also be used to pass chilled water through the cooling coil on the Liquid Calibration Baths (LCB) and Cooling Probe (FDB00CP) giving rapid cooling or a minimum temperature of +10°C.
 
Ordering Information

Product CodeDescription
FCH5H CH-5PC-5 230v 50Hz
   
Technical Specification

SpecificationsCH-5/PC-5
Temperature range 4°C to 15°C
Cooling capacity 400W
Temperature Control Thermostat on/off
Electrical control Manual
Bath Capacity 5 litres
Pump capacity 20 litres/minute
Pump Head height 6 metres with water
Bath Dimensions L x W x H (mm) 300 x 140 x 150
Overall Dimensions L x W x H (mm) 430 x 235 x 524
Weight 26.5kg
Online store by DBG Technologies, powered by LiveCube