Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

4-20 mA Input Cable - CABLE-4-20mA

Cable for connecting sensor with 4-20mA ouptut to HOBO U and X Series external-channel data loggers
Part Number: CABLE-4-20MA
$44.00 ex GST
[$48.40 inc GST]
Product Files

Cable for connecting sensor with 4-20mA output to HOBO U-Series and ZW Series external-channel data loggers

  • 18.5 inches in length
  • Can be plugged directly into the external input jacks of U12 Family loggers to expand the range of measurement options and applications.

Environment:
The CABLE-4-20mA Cable is for use in Indoor and Outdoor environments

Measurements:
The CABLE-4-20mA Cable supports the following measurements:

4-20mA

Cable for connecting sensor with 4-20mA output to HOBO U-Series and ZW Series external-channel data loggers

  • 18.5 inches in length
  • Can be plugged directly into the external input jacks of U12 Family loggers to expand the range of measurement options and applications.

Environment:
The CABLE-4-20mA Cable is for use in Indoor and Outdoor environments

Measurements:
The CABLE-4-20mA Cable supports the following measurements:

4-20mA

The 4-20mA cable (CABLE-4-20mA) measures currents from 0 to 20.1mA. The cable must be connected such that the current flows through, and with the proper polarity, as shown in the diagram. (Do not expose to current above 20mA or negative current.) Do not cut off the end of the gray cable where it connects to the blue and yellow wires, as this contains the precision resistor required for current measurements.

Online store by DBG Technologies, powered by LiveCube