Looking for a DATA LOGGER? Now see – www.hobodataloggers.com.au

12-bit Voltage Input Adapter - S-VIA-CM14

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.
Part Number: S-VIA-CM14
$138.00 ex GST
[$151.80 inc GST]
Product Files

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.

  • 12-bit resolution
  • Digital filtering improves measurement accuracy with 32 readings/sample—4-20 mA adapter has 60 Hz noise rejection
  • Measurement averaging over logging interval further enhances accuracy
  • Plug-in modular connector for easy interface with HOBO® Weather Station or HOBO® Micro Station data loggers
  • Screw terminal for connecting to sensors
  • Micro Station has room for two adapters and Weather Station has room for ten (adapters mount inside station enclosure)
  • Represents one data input channel

Environment:
The S-VIA-CM14 Sensor is for use in Indoor and Outdoor environments

Measurements:
The S-VIA-CM14 Sensor supports the following measurements :

DC Voltage
 
Outdoor use requires sensor to be within a weatherproof enclosure.

The 12-bit Voltage Input Adapter interfaces with sensors providing 0-5 VDC signals to act as a smart sensor with compatible data loggers. This adapter features both a non-switched input and a battery-saving switched input that extends the life of external batteries. It also provides a trigger signal for controlling power to attached external sensors, while offering digital filtering which improves measurement accuracy with 32 readings/sample.

  • 12-bit resolution
  • Digital filtering improves measurement accuracy with 32 readings/sample—4-20 mA adapter has 60 Hz noise rejection
  • Measurement averaging over logging interval further enhances accuracy
  • Plug-in modular connector for easy interface with HOBO® Weather Station or HOBO® Micro Station data loggers
  • Screw terminal for connecting to sensors
  • Micro Station has room for two adapters and Weather Station has room for ten (adapters mount inside station enclosure)
  • Represents one data input channel

Environment:
The S-VIA-CM14 Sensor is for use in Indoor and Outdoor environments

Measurements:
The S-VIA-CM14 Sensor supports the following measurements :

DC Voltage
 
Outdoor use requires sensor to be within a weatherproof enclosure.

Measurement range: 0-5 V DC
Accuracy: ±10mV ±0.3% of reading (over operating temperature range)
Resolution: ±1.221 millivolts
Input impedance: 1 Megohms
Sensor Trigger Open Collector: Maximum sink current: 115 mA; 30V maximum
Sensor Trigger Source: Voltage: 2.5 V ±2.4%; maximum current: 1 mA
Trigger Timing:Warm-up Time: 10.3 ms ±3% (fixed)Measurement Time: 2.4 ms ±3%
Cable Length: 14 cm (5.5 inch)
Ground connection: Same for adapters and PC interface

Online store by DBG Technologies, powered by LiveCube